Hi guys,
Hopefully someone here can help me.
I have looked at the post by omikes on this topic and it works all the way to the last step. His guide is here. <https://www.gc-forever.com/forums/viewt ... Gws#p42353>
I get to step 16 and it refuses to program. It gives me the Impact 923 error, can not find cable, check set up, and Module windrvr6 is not loaded reinstall cable drivers.
Not sure how to proceed. Hopefully someone out there is nice enough to help me
Thanks guys
Trying to update an older Carby
-
- Posts: 1
- Joined: Thu Apr 29, 2021 9:16 am