gc-forever - Gamecube/Wii Forums

Hi all, i have a new Pluto 2x board that is revision E.

I have wired it correct, and also shorted the jumper so you don’t need the resistor.

I get audio and video for about 30 seconds to 1 minute. The video will keep playing, the audio will get garbled and distorted and then the audio goes out. The video will stay on for about another 10 seconds and then nothing at all.

Anyone know what the heck is happening here? I have tried this same Pluto board on 2 different GameCube boards and both produce the same exact issue. I’m leaning towards a defective Pluto board, but maybe its something else i might have overlooked.

Any input is appreciated before i ship the Pluto back for another one.

Thanks.

Any reason why you use that revision? Gcvideo made the makers of the Pluto 2x extremely profitable to say the least I’m sure they wouldn’t of stopped producing the board or at least make a 1:1 compatible revision. If it is compatible and has a Xilinx xcs200a on it and compatible spi it should in theory work but would most likely require a completely different bitstream

Also they sell the Pluto with gcvideo preinstalled? Don’t they