[DEV - Gamecube] : NGC Region Selector

Portables, case replacements, mods etc, all in here!
Post Reply
User avatar
Xrider
Posts: 4
Joined: Wed Jun 30, 2021 8:49 pm

[DEV - Gamecube] : NGC Region Selector

Post by Xrider » Wed Jun 30, 2021 9:09 pm

Hi,

I come to share with you a project that I just finished;)
it concerns the Gamecube, but only the JAP & USA versions (DOL-001)

The region switch is not a discovery, it already existed.
But I integrated an IC for management in switchless mode.
The code is in an 8-pin chip.
The circuit is optimized to integrate very easily on the console.

Prototype that was used in the development of this mod:

Image



I quickly designed an integrated circuit and added an additional function that allows you to swap the color of the led by closing a jumper on the integrated circuit.

the logic of the LED color:
OPEN jumper:
ORANGE LED -> JAP
BLUE LED -> US

CLOSED jumper:
ORANGE LED -> US
BLUE LED -> JAP
Final version :

ImageImage

And here is the presentation / tutorial video:
https://www.youtube.com/watch?v=ZU8yoWk-aEw
[youtube]https://www.youtube.com/watch?v=ZU8yoWk-aEw[/youtube]

Xrider
User avatar
Xrider
Posts: 4
Joined: Wed Jun 30, 2021 8:49 pm

Re: [DEV - Gamecube] : NGC Region Selector

Post by Xrider » Thu Jun 02, 2022 4:32 pm

Hello,

New batch available :
https://www.ebay.fr/itm/334462104417
Post Reply