3d printed gamecube shell?
-
- Posts: 49
- Joined: Tue Oct 03, 2017 4:59 pm
- Location: texas
3d printed gamecube shell?
i was trying to find a 3d printed gamecube shell because i know their a few online that is around like a memory card holder, controller joystick mod, and even custom memory/sd mod. but i can't find a gamecube shell that is somewhat slim that does not have the mini disc drive. does anybody know a site or person who design a shell that is slim and does not have a drive in it.
- Doctorbeefy
- Posts: 12
- Joined: Sat Feb 06, 2021 1:10 am
- Contact:
Re: 3d printed gamecube shell?
have you looked at thingiverse.com? You might be able to find a top half and modify it to work.
Re: 3d printed gamecube shell?
I wonder how it will turn, as the front panel is already quite up, and over the MB top, so getting it flush the top, if not redesigned/trimmed, it may not look that good.
If you have a DOL-101 and don't use the bottom connectors, you may shrink the under part as well.
If you have a DOL-101 and don't use the bottom connectors, you may shrink the under part as well.
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)