GCDual problem

Find all your GameCube topics here
Post Reply
BlueberryPhazon
Posts: 1
Joined: Mon Apr 05, 2021 2:48 am

GCDual problem

Post by BlueberryPhazon » Mon Apr 05, 2021 3:16 am

I installed a GCDual and it had been working great for about a month. Then out of nowhere, it stopped outputting through hdmi. The multi out and digital out ports still work. When turned on, the GCDual flashes twice (once bright then once dim) and then nothing. Did I ruin it? Did I break a fuse? Do I need to send it to someone to fix it? Do I need a whole new GCDual? Thanks
SkydivinGirl
Posts: 29
Joined: Sun Sep 15, 2019 3:42 pm

Re: GCDual problem

Post by SkydivinGirl » Wed Jul 28, 2021 3:47 pm

Doesn't look like anyone ever answered your question and I hope you already figured it out. The only thing I can suggest is that there may be flux under one of your PCBs soldered to the main board. Check for shorts between the solder points. If you find a short, clean that area again, trying to get between the boards as much as possible. On one GC Dual I installed, solder flowed between the PCB to another solder joint. I always check for shorts but I had to wick up the solder from both connections to pull that solder out then redo them.

Good luck!

Heather
Post Reply