Viper gc extreme and xeno gc?
-
- Posts: 448
- Joined: Mon Apr 05, 2010 4:11 pm
- Location: Germany
Viper gc extreme and xeno gc?
Is it possible to solder a xeno gc and a viper gc extreme in one console?
Re: Viper gc extreme and xeno gc?
2 chips... why?
-
- Posts: 448
- Joined: Mon Apr 05, 2010 4:11 pm
- Location: Germany
Re: Viper gc extreme and xeno gc?
its very hard to find modchips for the gamecube. in future maybe my viper chip will be damaged then I have still a xeno gc inside my cube and dont need to search a chip.
Re: Viper gc extreme and xeno gc?
The Xeno is designed to disable and ignore all drive patching (unless you forcefully disable the Xeno chip via software) - it should behave along with the Viper although I couldn't be 100% sure on that
-
- Posts: 448
- Joined: Mon Apr 05, 2010 4:11 pm
- Location: Germany
Re: Viper gc extreme and xeno gc?
does this mean it should work? shall I disable drive patching in the viper menu?
Re: Viper gc extreme and xeno gc?
yes and yes
Re: Viper gc extreme and xeno gc?
I saw somewere a picture of a switch soldered on a Xeno to dis-/enable it, don't know if it works though.
-
- Posts: 448
- Joined: Mon Apr 05, 2010 4:11 pm
- Location: Germany
Re: Viper gc extreme and xeno gc?
yeah i also saw this picture. it was on tehskeen.Dragoon wrote:I saw somewere a picture of a switch soldered on a Xeno to dis-/enable it, don't know if it works though.
Re: Viper gc extreme and xeno gc?
It's offline now, maybe you can retrieve it via web archive.yamaharacer wrote:yeah i also saw this picture. it was on tehskeen.Dragoon wrote:I saw somewere a picture of a switch soldered on a Xeno to dis-/enable it, don't know if it works though.
-
- Posts: 163
- Joined: Fri Apr 09, 2010 4:30 pm
Re: Viper gc extreme and xeno gc?
There was a guy by the name of noobcube over at thepurplecube.org who had the Qoob, Xeno, and Viper all in one cube. He used a switch to toggle between them. Kind of a neat concept to see how the chips behaved in the same console/drive.
Re: Viper gc extreme and xeno gc?
if you want to have a switch to enable or disable your xeno, just connect wires to it instead of soldering it on the pcb. place a switch on these wires and voila!
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
-
- Posts: 448
- Joined: Mon Apr 05, 2010 4:11 pm
- Location: Germany
Re: Viper gc extreme and xeno gc?
liquitt your statement is ok but you just need to set a switch to one wire and not to everyone. here is the picture:
and by the way the xenogc also can be soldered to the board. you dont need wires or anything. the O is ground potential and when you switch the other pont to ground the xeno gc is disabled.
and by the way the xenogc also can be soldered to the board. you dont need wires or anything. the O is ground potential and when you switch the other pont to ground the xeno gc is disabled.
Re: Viper gc extreme and xeno gc?
well my suggestion was the lazy one
don't search the ports for the one who powers it - just assume they all do. haha
don't search the ports for the one who powers it - just assume they all do. haha
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
-
- Posts: 448
- Joined: Mon Apr 05, 2010 4:11 pm
- Location: Germany
Re: Viper gc extreme and xeno gc?
yeah but its hard do find a switch which has 12 pins for 6 signals. and if you use 6 switches it looks pretty shity
Re: Viper gc extreme and xeno gc?
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
Re: Viper gc extreme and xeno gc?
First solution, Dip Switch, small, cheaper and very easy to find, one, problem, you must take care if you put on two channels xDDD.yamaharacer wrote:yeah but its hard do find a switch which has 12 pins for 6 signals. and if you use 6 switches it looks pretty shity
Next aproximation, a Rotary Dip Switch, small, cheap, and you don't take care about two signals on. But i think this type have 1 Ground Common...
Other solution an Rotary Switch X Poles X Positions
Another, Multi-Pole Switch, X grouds X poles, maybe you can find this tipe of switch in an guitar shop, they are used in electric guitars.
Other, Slide Switch...
You can buy in this cheap online shop some switches: http://www.futurlec.com/Switches.shtml
Only one problem, they take along time to shipping, about one moth to shipping to Spain for example hehehe, but is very cheap ^_^
And here another reference with a good catalog, with pics, spec...
http://www.switronic.com.tw/EnglishPage ... fAodBQpE5g
Good luck with your search !!!