Startup sounds on my WKF cube?

All your console related questions and answers :)
Post Reply
siphoned
Posts: 189
Joined: Wed Mar 31, 2010 3:50 pm

Startup sounds on my WKF cube?

Post by siphoned » Sun Jan 05, 2014 5:22 pm

I just noticed my WKF Gamecube doesn't do the normal start up screen with the falling blocks and the cool sounds. The logo just fades in without any sounds. This is no good. I like the falling block thing. I tried out my WKF MEGAcube and it does the same thing, no opening start up sounds. Is this a WKF thing? I will have to set up a series of tests starting with a stock cube and moving into the other cubes, see how deep this conspiracy goes.
novenary
Posts: 1756
Joined: Mon Dec 30, 2013 7:50 am

Re: Startup sounds on my WKF cube?

Post by novenary » Sun Jan 05, 2014 6:10 pm

A stock Cube does that when there's no disc or the lid is open when you power it up. To fix it you'll need to make your WKF autobooting and you'll boot straight to it or to Swiss if that's what you have.
siphoned
Posts: 189
Joined: Wed Mar 31, 2010 3:50 pm

Re: Startup sounds on my WKF cube?

Post by siphoned » Sun Jan 05, 2014 7:23 pm

I have it set to auto boot swiss but the SD card I'm using only lets me auto load swiss. Would the startup screen go back to normal if I was using the WKF firmware/menu and didn't have swiss on it? Not sure that would be worth it, but I do miss those little blocks. It seems to be the same with or without an sd card in the wiikey. Bummer.
novenary
Posts: 1756
Joined: Mon Dec 30, 2013 7:50 am

Re: Startup sounds on my WKF cube?

Post by novenary » Sun Jan 05, 2014 7:56 pm

What I mean by autoboot is downgrade the WKF to 1.0. Then you'll get back the startup animation/jingle and you won't need to press pin 29.
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: Startup sounds on my WKF cube?

Post by megalomaniac » Sun Jan 05, 2014 8:16 pm

its the SD card...
some SD cards allow autoboot while other SD cards only autoload...


autoboot = blocks falling and immediate boot into swiss/wkf main menu
autoload = no blocks falling and only a fade effect where you have to go into the gameplay menu to manually start swiss/wkf


there is no way to identify at this time how or why the SD cards affect startup differently
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
siphoned
Posts: 189
Joined: Wed Mar 31, 2010 3:50 pm

Re: Startup sounds on my WKF cube?

Post by siphoned » Mon Jan 06, 2014 2:37 am

Yeah it was a stock WKF taken to swiss so it was never downgraded before being convered over to swiss autoboot. I have some cards that autoboot and some that auto load. Too bad my larger capacity cards only autoload.

hmm... 32GB autoloading swiss on a WKF..... thats something I don't want to give up anytime soon.... looks like I'll do without the falling blocks.

wait.... what if I put the disc drive back into the MEGAcube, maybe a drive with the Xeno chip.... does a XenoFusion cube have the cool falling blocks if turned on without a disc or sd card?
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: Startup sounds on my WKF cube?

Post by megalomaniac » Mon Jan 06, 2014 3:01 am

with no SD card in the WKF/WASP slot and a dvd in the drive, then you will see a normal intro with the falling blocks and boot straight into the dvd title
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
Post Reply