GameCube Memory Card & SD Gecko Diagrams

Portables, case replacements, mods etc, all in here!
User avatar
Ashen
Posts: 994
Joined: Tue Nov 16, 2010 3:08 pm

GameCube Memory Card & SD Gecko Diagrams

Post by Ashen » Sat Aug 06, 2011 6:39 pm

Please note: Duplication in part or in whole of any part of this guide, its contents or visual references is strictly prohibited without the express consent of the author.

These are my diagrams for GC memorycard rewiring and for wiring up an SD Gecko. They go along well with my motherboard trimming guide. Thought they might prove useful to some.

GC Memorycard pinout & notes:
Pin #'s shown coincide with the pin #'s printed on top of the GC motherboard.
Image

SD Gecko pinout & signal's:
Pin #'s shown are SD card pin #'s. When wiring to GC match up signals only! INT signal is only needed on pin 9 IF you plan to make up a microSD to GC adapter as shown below. If you don't care about this feature, then the INT signal is not needed for SD Gecko operation.
Image

GameCube motherboard pinouts & signals:
Slot A - TOP of motherboard:
Image
Slot A - BOTTOM of motherboard - Relocation points also shown:
Image
Slot B - TOP of motherboard:
Image
Image

SD Gecko (micro SD card adapter) to GC memory card slot signal's:
Again the pin #'s shown here are SD Card pin #'s. Match up the signals shown to a GC memcard slot to make up a handy adapter if you have internalized the SD Gecko slot on your portable.
Image
sumas
Posts: 70
Joined: Thu Feb 17, 2011 8:29 pm
Location: Germany

Re: GameCube Memory Card & SD Gecko Diagrams

Post by sumas » Sun Aug 07, 2011 7:41 pm

Nice Tutorial

Great WORK

Do you know where snese in / out is used?
User avatar
infact
Posts: 346
Joined: Tue Mar 29, 2011 4:35 am
Location: Germany

Re: GameCube Memory Card & SD Gecko Diagrams

Post by infact » Sun Aug 07, 2011 10:27 pm

The sense line is for the gamecube to detect if a memory card is inserted or not.
If Pin 1 and 12 are connected, a memcard is inserted, otherwise not.

This is especially useful if your sd card connector also has a "card inserted"-feature.

edit: like this one:

Image
Attachments
e59bt.png
(105.9 KiB) Not downloaded yet
infact
Image Image
User avatar
Drakon
Posts: 86
Joined: Thu Jun 13, 2013 2:55 am
Location: Toronto Canada
Contact:

Re: GameCube Memory Card & SD Gecko Diagrams

Post by Drakon » Tue Jul 16, 2013 10:06 pm

Mine didn't work until I soldered sense to 3.3v. I soldered up a spare microsd adapter. Maybe it should be mentioned somewhere in the guide that it may not work unless you solder sense to 3.3v or have a memory card shaped thing inserted? I just guessed what to do based on those happy arrows.

Something else I'm wondering. If the gamecube memory card is the same technology as a sd card, why can't you use a regular gamecube memory card like a sd gecko? Just copy files from the wiikey sd slot to the memory card using swiss. I tried it and obviously this didn't work, I'm curious why not, wrong format?
User avatar
Ashen
Posts: 994
Joined: Tue Nov 16, 2010 3:08 pm

Re: GameCube Memory Card & SD Gecko Diagrams

Post by Ashen » Wed Jul 17, 2013 1:21 am

I'm pretty sure the communication protocol is slightly different or something. The GC memcards require the extra "int" signal to work. Normal SD cards don't actually need this signal to work.
User avatar
kinect360
Posts: 113
Joined: Tue Jan 28, 2014 2:37 pm
Location: C A N A D A

Re: GameCube Memory Card & SD Gecko Diagrams

Post by kinect360 » Wed Feb 19, 2014 2:38 am

You should put a line of text some where saying 3.3v needs to be connected to sense. Wasn't clear to me at first in the diagram and my sd gecko wasnt working but after reading further in here I found out why.
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: GameCube Memory Card & SD Gecko Diagrams

Post by megalomaniac » Wed Feb 19, 2014 2:53 am

the diagram shows 3v3 going to sense
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
User avatar
kinect360
Posts: 113
Joined: Tue Jan 28, 2014 2:37 pm
Location: C A N A D A

Re: GameCube Memory Card & SD Gecko Diagrams

Post by kinect360 » Wed Feb 19, 2014 2:55 am

Yes I am aware, but it was not clear to me. I am just saying it would've helped me if there was a line of text saying that as it could possibly help someone else.
User avatar
kinect360
Posts: 113
Joined: Tue Jan 28, 2014 2:37 pm
Location: C A N A D A

Re: GameCube Memory Card & SD Gecko Diagrams

Post by kinect360 » Thu Feb 20, 2014 8:47 pm

Does anyone know the pin outs for the wasp adapter or the fusion adapter? Looking to wire it as SD gecko. It has a 12 pin connector. I dont think I should wire straight to the adapter part, there are caps right after, they must have some importance?

Image
Attachments
IMG_20140220_164253.jpg
(66.79 KiB) Not downloaded yet
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: GameCube Memory Card & SD Gecko Diagrams

Post by megalomaniac » Fri Feb 21, 2014 2:55 am

does this make things easier to understand?


Image
Attachments
IMG_20140220_164253.jpg
(99.35 KiB) Not downloaded yet
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
User avatar
kinect360
Posts: 113
Joined: Tue Jan 28, 2014 2:37 pm
Location: C A N A D A

Re: GameCube Memory Card & SD Gecko Diagrams

Post by kinect360 » Fri Feb 21, 2014 2:58 am

I was planning on doing this, but there are capacitors right after where the pins connect to the line, I'm guessing according to you they are not important? lol
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: GameCube Memory Card & SD Gecko Diagrams

Post by megalomaniac » Fri Feb 21, 2014 3:01 am

cut the board
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
User avatar
kinect360
Posts: 113
Joined: Tue Jan 28, 2014 2:37 pm
Location: C A N A D A

Re: GameCube Memory Card & SD Gecko Diagrams

Post by kinect360 » Fri Feb 21, 2014 3:04 am

Sounds like a good idea :) Right where you marked should be fine?
Lollipop
Posts: 22
Joined: Wed Jun 12, 2013 1:11 am

Re: GameCube Memory Card & SD Gecko Diagrams

Post by Lollipop » Thu Mar 06, 2014 8:00 am

Hi Kinect, if you don't want to bother with the cutting you can actually just solder right to the points right before the caps and resistors effectively bypassing them. I did that on the WKF adaptor and it works fine.
User avatar
kinect360
Posts: 113
Joined: Tue Jan 28, 2014 2:37 pm
Location: C A N A D A

Re: GameCube Memory Card & SD Gecko Diagrams

Post by kinect360 » Thu Mar 06, 2014 12:32 pm

Yes I cut it a few weeks ago but thanks anyways.

Image
Attachments
IMG_20140222_092211.jpg
(78.48 KiB) Not downloaded yet
User avatar
MockyLock
Posts: 330
Joined: Tue Aug 07, 2012 8:12 pm
Location: France

Re: GameCube Memory Card & SD Gecko Diagrams

Post by MockyLock » Thu Mar 06, 2014 1:20 pm

I see all the wires you tried to bind with strap.
It's a little tip, as i'm really not the best for such work, but for this kind of wiring, I use IDE cables. Once you cut the IDE plugs, you have some pretty useful cable ribbons.
The 2 different kinds of IDE cables (40 and 80 wires) give you 2 choice of diameter, the thinner the flexier.
User avatar
kinect360
Posts: 113
Joined: Tue Jan 28, 2014 2:37 pm
Location: C A N A D A

Re: GameCube Memory Card & SD Gecko Diagrams

Post by kinect360 » Thu Mar 06, 2014 7:58 pm

The WFK wiring is a mess since I ordered the wrong break out board, but it is all bundled up using electrical tape to try and make it cleaner.
User avatar
RazorX2014
Posts: 173
Joined: Sun Feb 23, 2014 6:50 pm

Re: GameCube Memory Card & SD Gecko Diagrams

Post by RazorX2014 » Mon Dec 29, 2014 4:39 pm

here are the images i took of my 64MB USB Gamecube Memory Card:

Image

Image

Image

Image


here are the images i took of my DOL-014 251 Gamecube Memory Card:

Image

Image
Attachments
DOL-014_251_Gamecube_Memory_Card_Back.jpg
(1.47 MiB) Not downloaded yet
DOL-014 251 Gamecube Memory Card (Front).jpg
(2.33 MiB) Not downloaded yet
64MB USB Gamecube Memory Card (Complete).jpg
(2.23 MiB) Not downloaded yet
64MB USB Gamecube Memory Card (Case).jpg
(2.27 MiB) Not downloaded yet
64MB USB Gamecube Memory Card (Back).jpg
(2.3 MiB) Not downloaded yet
64MB USB Gamecube Memory Card (Front).jpg
(2.49 MiB) Not downloaded yet
User avatar
RazorX2014
Posts: 173
Joined: Sun Feb 23, 2014 6:50 pm

Re: GameCube Memory Card & SD Gecko Diagrams

Post by RazorX2014 » Mon Dec 29, 2014 5:54 pm

here are the images i took of my Third Party 128MB Gamecube Memory Card:

Image
Attachments
Third Party 128MB Gamecube Memory Card.jpg
(2.14 MiB) Not downloaded yet
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: GameCube Memory Card & SD Gecko Diagrams

Post by tueidj » Tue Dec 30, 2014 9:02 am

Heh, those are actually 64Mbit and 128Mbit cards (8MB and 16MB). Some of the makers deliberately misinterpret the units to make you think you're getting better value.
User avatar
RazorX2014
Posts: 173
Joined: Sun Feb 23, 2014 6:50 pm

Re: GameCube Memory Card & SD Gecko Diagrams

Post by RazorX2014 » Tue Dec 30, 2014 6:00 pm

yeah you go by the blocks if its 1019 its 64 Mbit but still a 128MB memory card from ebay is next to nothing in price and anythings better than 59 blocks lol
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: GameCube Memory Card & SD Gecko Diagrams

Post by tueidj » Wed Dec 31, 2014 2:50 am

Depends how you look at it, a "128MB" card is actually only 16MB (128Mbit) and they're normally priced for more than what a 4GB SD card would cost...
User avatar
RazorX2014
Posts: 173
Joined: Sun Feb 23, 2014 6:50 pm

Re: GameCube Memory Card & SD Gecko Diagrams

Post by RazorX2014 » Wed Dec 31, 2014 2:55 am

but you cant use an sd card for saves lol
theclaw
Posts: 324
Joined: Tue Dec 13, 2011 12:01 pm

Re: GameCube Memory Card & SD Gecko Diagrams

Post by theclaw » Wed Dec 31, 2014 5:25 am

tueidj wrote:Depends how you look at it, a "128MB" card is actually only 16MB (128Mbit) and they're normally priced for more than what a 4GB SD card would cost...
I suppose a list of known 128mbyte cards would be useful.

Never owned any card claiming it's 2043 blocks.
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: GameCube Memory Card & SD Gecko Diagrams

Post by tueidj » Wed Dec 31, 2014 9:48 am

RazorX2014 wrote:but you cant use an sd card for saves lol
You can when using a wii.
theclaw wrote:I suppose a list of known 128mbyte cards would be useful.
Here's a list of all 128mbyte cards:


Spoiler
Show
(there aren't any, 16MB is the largest possible size.)
Post Reply