Post
by b0rtht » Thu Jul 10, 2014 9:40 pm
Hello I am new here but I have been using swiss since the first versions.
I have problems with the latest builds, at least r265, r267 and r268. With r260, for example, everything is working.
I use SD Gecko with AR.
The problem is, after loading swiss (r268) I swap the SD card because the card I use to load swiss is very small. The two SDHC cards that I have do not work at all now, stuck in Reading SD in slot. I have to take out the card or wait a long time for going back to the device selection screen.
I tried swapping to a normal SD 2GB card and it works but only in Slot A.
With r260 everything is working. I have not tried with r261-r264 versions so don't know exactly when something changed.
Strange, I searched on the internet and found these swiss builds compiled in other site, and they are working, but these do not have the same files and there are differencies, for example, in the r268 from that site the svn revision number is not showed. It shows "Rev: " and blank space so I think they are not the same.