bitmap2bnr is a small command line tool that combines bitmap2tga and GCBanner (by loser) to directly convert a bitmap to a version 1 Gamecube banner file (.bnr).
bitmap2tga is another small command line tool that converts a bitmap to a 24bit tga image.
The following bitmap formats are supported for both tools:
bmp, gif, exif, jpg, png and tiff
Both tools require .NET Framework 3.0 or higher to run and therefore only work with Windows.
Usage:
Read the howto.txt provided with each tool
There are most likely better tools out there to do the same thing but I hope this might be useful to someone the same way it was useful to me
bitmap2bnr and bitmap2tga tool
bitmap2bnr and bitmap2tga tool
- Attachments
-
- bitmap2bnr.zip
- (50.84 KiB) Downloaded 415 times
-
- bitmap2tga.zip
- (71.54 KiB) Downloaded 378 times
Re: bitmap2bnr and bitmap2tga tool
Nice work ![Smile :)](./images/smilies/icon_e_smile.gif)
Did you write these, if so, source would be nice if someone wanted to port it or build it for another OS.
![Smile :)](./images/smilies/icon_e_smile.gif)
Did you write these, if so, source would be nice if someone wanted to port it or build it for another OS.
![Image](http://www.gc-forever.com/files/emusig.jpg)
Re: bitmap2bnr and bitmap2tga tool
Thanks ![Smile :)](./images/smilies/icon_e_smile.gif)
Yes I did write bitmap2tga myself and the source is already included in the zip (It's written in C# good luck porting that)
and bitmap2bnr is a .cmd script for Windows and you can just open it in Notepad or something similar.
But GCBanner is by someone else and I do not have the source for it (maybe someone else does)
![Smile :)](./images/smilies/icon_e_smile.gif)
Yes I did write bitmap2tga myself and the source is already included in the zip (It's written in C# good luck porting that)
and bitmap2bnr is a .cmd script for Windows and you can just open it in Notepad or something similar.
But GCBanner is by someone else and I do not have the source for it (maybe someone else does)