Swiss 0.1

KirovAir · Post by **KirovAir** » Tue May 17, 2011 7:55 am

That's quite awesome actually. I'm really hoping that the implementation will happen some day, that will certainly justify the purchase of a WODE.

YouTube · Post by **emu_kidid** » Tue May 24, 2011 2:53 am

infact, how's the GUI going?

Side note, I've been optimizing the SD read code as well as relocating all the patch codes to the top 16Kb RAM area for the past week or so.

WiiPower · Post by **WiiPower** » Tue May 24, 2011 9:00 am

I hope it will be able to use the read code in both places, just asking to be sure. Can you test Starfox Adventures and 007 Agent under Fire with this? Lowering the available memory for these 2 didn't work for me directly, got me an error in the apploader. Which is why i do the memory setup after the apploader, and i have to move bi2 and fst.

infact · Post by **infact** » Tue May 24, 2011 10:55 pm

emu, have been low on free time last week, so only the filebrowser is working...

more to come

Hells Guardian · Post by **Hells Guardian** » Wed May 25, 2011 1:02 pm

Sweet! now we have a team effort. Can't wait to see more. I'm getting my new wii by friday and setting swiss up imeadiately after I install all the latest cIOS and bring all the apps up to date and setup my System menu and all my channels ect. Also need to install all my old VC titles and a working disc drive need to be installed... Ok It's on my list of things to do.

What was the current revision again? still 52 right?

Dogway · Post by **Dogway** » Thu May 26, 2011 9:02 pm

This is very strange. I tried loading FZero.iso pal and it gives an error after pressing Boot.
I have swiss renamed to start.dol in my SDgecko SD root, and fzero inside a folder (I also tried in root).
I insert SDGecko, insert an original wii game, go to HBC, run GCBooter. Then Swiss loads up, and I can configure the rest, I tried slot b and a, and fast and compatibility mode, info tells me it should boot, and 2Gb SD is FAT16 already defragmented. Does this game have any problem? I could run it with SD Boot 0.4 final but after 2 races I lost music, and then screen turned to black...

YouTube · Post by **emu_kidid** » Thu May 26, 2011 11:33 pm

Dogway, use WiiPower's swiss Wii booter.

Dogway · Post by **Dogway** » Fri May 27, 2011 12:32 am

Thanks! Worked like charm. Although I had to choose to not stop the dvd motor.
btw 3rd strike rules, hope to get one day cps1/2 games working in homebrew : D

YouTube · Post by **emu_kidid** » Fri May 27, 2011 3:07 am

heh, unrelated but FYI, 3rd strike is CPS3

bearteam · Post by **bearteam** » Fri May 27, 2011 3:27 am

emu_kidid wrote:heh, unrelated but FYI, 3rd strike is CPS3

It's too hard for FinalBurn to run CPS3 games on XBOX, so it is also impossible to run 3rd strike at full speed via FinalBurn or MAME emulator on Gamecube.

Dogway · Post by **Dogway** » Fri May 27, 2011 7:10 am

emu_kidid wrote:heh, unrelated but FYI, 3rd strike is CPS3

Did I say it wasn't?

s8n187 · Post by **s8n187** » Mon May 30, 2011 6:28 am

hi emu_kidid ,

I've been optimizing the SD read code as well as relocating all the patch codes to the top 16Kb RAM area for the past week or so.

the next release of Swiss sounds very exciting.........any ETA on when it will be out ?

s8n

rod_br · Post by **rod_br** » Thu Jun 02, 2011 1:03 pm

Did SD Gecko works with 16gb memory stick?

yamaharacer · Post by **yamaharacer** » Thu Jun 02, 2011 1:47 pm

i am using 32gb in my sd gecko. so yes 16gb should work.

rod_br · Post by **rod_br** » Fri Jun 03, 2011 12:23 am

yamaharacer wrote:i am using 32gb in my sd gecko. so yes 16gb should work.

Great! Thank you!

BigRobotBil · Post by **BigRobotBil** » Sat Jun 18, 2011 2:32 pm

Finally got around to trying my harddrive setup again, and still no luck. Swiss says that all my files are fragmented, and I'll get a code dump screen if I try to boot anything.

Harddrive I'm using: Western Digital WD800LB-55DNA0 80GB.

Cubelover · Post by **Cubelover** » Tue Jun 21, 2011 2:25 pm

Slab of concrete wrote:F-Zero GX - working

It's working for me, but I have serious sound issues. Using latest Swiss revision and the 1:1 dumped PAL version not shrunked on a Wii with a 2GB Sandisk card. Tried both 16Mhz and 32Mhz. Can anyone confirm those sound issues or is it maybe my SD card?

Edit: Is F-Zero an audio streaming game?

YouTube · Post by **emu_kidid** » Tue Jun 21, 2011 2:39 pm

No it isn't.

Burbruee · Post by **Burbruee** » Wed Jun 22, 2011 6:33 am

I didn't notice any sound issues neither from SD or HDD beside the "normal" occasional audio glitches the first 1-2 second a new screen/scene is loaded, which happens in most games. (I don't know if it has a name, but it's been there since the BBA-streaming days)

Invader_Zim · Post by **Invader_Zim** » Wed Jun 22, 2011 3:24 pm

Cubelover wrote:
Slab of concrete wrote:F-Zero GX - working
It's working for me, but I have serious sound issues. Using latest Swiss revision and the 1:1 dumped PAL version not shrunked on a Wii with a 2GB Sandisk card. Tried both 16Mhz and 32Mhz. Can anyone confirm those sound issues or is it maybe my SD card?

Edit: Is F-Zero an audio streaming game?

Same with me with Mario Kart Double Dash. I use a San Disk 2GB SD card, too, but for me only 16Mhz works so far. And I'm thinking that it is the SD Card, maybe too slow but I bought that piece just a few days ago.

Another thing is that a FAT16 formatted card is not working.

Besides, how does swiss handle the DVD-R boot option other than a modchip or is it the same? I tested Zelda Four Swords Adventure with no problem at all, completed it. F-Zero GX just gives me a DRE after creating a save slot on the memory card.

Ardiloso · Post by **Ardiloso** » Wed Jun 22, 2011 4:57 pm

Anyone tested MGS The Twin Snakes? The disc 2 won't play ;_;
After Konami screen, I got this error:

I finished the first disc with no problem (works beautifuly).

ps: tested with and without pre-patcher, on gamecube.

Chun-kun · Post by **Chun-kun** » Wed Jun 22, 2011 9:53 pm

Ardiloso wrote:Anyone tested MGS The Twin Snakes? The disc 2 won't play ;_;
After Konami screen, I got this error:

I finished the first disc with no problem (works beautifuly).

ps: tested with and without pre-patcher, on gamecube.

Whith what setting did you play the first disc?
I can't get the game to work with 32 Mhz. I get this screen too.

Ardiloso · Post by **Ardiloso** » Wed Jun 22, 2011 10:17 pm

Chun-kun wrote:
Ardiloso wrote:Anyone tested MGS The Twin Snakes? The disc 2 won't play ;_;
After Konami screen, I got this error:

http://i54.tinypic.com/v8k65v.jpg

I finished the first disc with no problem (works beautifuly).

ps: tested with and without pre-patcher, on gamecube.
Whith what setting did you play the first disc?
I can't get the game to work with 32 Mhz. I get this screen too.

32Mhz. You have to pre patch the disc 1 first.

Chun-kun · Post by **Chun-kun** » Wed Jun 22, 2011 10:18 pm

I did but it's still not working. Does it play a role which region it is?

Ardiloso · Post by **Ardiloso** » Thu Jun 23, 2011 1:03 am

Chun-kun wrote:I did but it's still not working. Does it play a role which region it is?

Mine is NTSC-U, I don't know about other regions. Finished the disc 1 perfectly, now i'm just dying to play the other half of the game.

It's my preparation for this: http://wp.clicrbs.com.br/canaldosgames/ ... hdcapa.jpg

Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1