Page 1 of 1

Problems with backupgames :(

Posted: Thu Jan 06, 2011 8:02 pm
by Snake10000
Hi @ all^^

I have a question about the playing of gamebackups, ich have bought the SD Media Launcher last week and downloaded the SD-Boot 0.4 directly but i have problems with playing the backups... an example: In Mario Party 7 after every round or every second round a disc read error appears. In Luigis Mansion is it the same and Metroid Prime 2 doesn't start at all. I've tested it with SD-Boot 0.4 and 0.3 but it doesn't make any sense.

Yesterday I had opened the gc and adjusted the Potentiometer at 150 Ohm the burned GC Backups (Platinum mini DVD-R) started but after time they have also DRE's too (only Super Mario Sunshine and Zelda 4 Swords Adventures work for longer time).

Have I made any mistakes or are my Images bad...
Can I do anything to make the GC playing the games correctly...

greetz
Snake10000

PS: If it is of interest ive got an PAL Gamecube with an 06 Drive and have tested the Mini DVD's with Gcos 1.5

Sorry for my bad english i'm german ;D

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 8:22 pm
by Aressi
Try another dvd trademark

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 8:29 pm
by Snake10000
That's one opinion i've thinked of too, but why have the games on my sd card the almost same errors ...

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 8:52 pm
by Aressi
Maybe is a compatibility problem, for example when I play ikaruga a DRE appears every time, for the dvd games try using another bios like gcom 2.4, because when i play in ikaruga from dvd appears the same DRE like if were playing from sd but with gcom 2.4 I can play normally

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 8:58 pm
by Snake10000
sorry I'm new on this ground, is gcom 2.4 an Bios like GCOS 1.5?
Is it startable under SD Media Launcher because i think without modchip there are not many opinions to play backupgames ^^

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 10:22 pm
by Aressi
Yes, is a .dol file like gcos 1.5 but more simple, maybe could be a problem of compatibility using SD Media Launcher for backups with sdboot, I use a ntsc gamecube with chip xeno to load sdload in dvd and wiikey sd adapter to load .dol files

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 10:30 pm
by emu_kidid
That's definitely the issue with sd-boot. it needs a proper GC Game disk in the drive to work.

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 11:08 pm
by Snake10000
sorry, but i don't understand, what do you mean with "proper" game disc, does SD-Boot have Problems with the original SD Media Launcher DVD?

and... have anybody the gcom2.4.dol file which can be use with SDML, i didn't have found anything :oops:

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 11:37 pm
by emu_kidid
the SD Media Launcher DVD is not a valid DVD in the sense of a Gamecube DVD. It purposely has "bad sectors" to make dumping the disc difficult, also, it is actually harder for the Gamecube to read this disc, so I would recommend against it.

Re: Problems with backupgames :(

Posted: Thu Jan 06, 2011 11:42 pm
by Snake10000
emu_kidid wrote:the SD Media Launcher DVD is not a valid DVD in the sense of a Gamecube DVD. It purposely has "bad sectors" to make dumping the disc difficult, also, it is actually harder for the Gamecube to read this disc, so I would recommend against it.
ok I understand, could using a original gamecube game (like Mario Tennis) fix my gcos problem too, because gcos is reading the sectors for swapping too... if i unterstand you rightly? :D

Re: Problems with backupgames :(

Posted: Fri Jan 07, 2011 12:23 am
by emu_kidid
Nope - it wouldn't matter for GCOS. GCOS I'd use better DVD-r.

Re: Problems with backupgames :(

Posted: Fri Jan 07, 2011 1:22 pm
by Snake10000
Ok,
I would test the gcom2.4
but how can i make the dolfile with the "gcom24config.exe" i dont understand how i can it on pc, do i need a broadband adapter for gc?

Edit: 0k got it, Xp couldn't write the dol but vista worked fine :D

but my next problem is, the gcom2.4 stopped discspinning after the Regionselection, and the screen on the tv is black :(