gc-forever - Gamecube/Wii Forums

Hello everyone.

I want to use WKF on GC for GC-SDL.

After I find that the IPL of my GC is 1.0. So I need to install Swiss0.3 on Wiikey Fusion by WII.

So I get a WII,put WKF on WII.

First I Update to the official 1.5 firmware set region override to true,then place "Swissflash.gcm" onto the WBFS formatted SD

card using WBFS Manager 4.0.the SD-card is 2GB.

After WII reboot.When I enter the GC-channel again. "Init Wiikey Fusion" on screen.

Then I get a small size SD-card (32MB) I formater it for Fat.Put SwissFlasher.iso(SwissFlasher.gcm) onto it.

So I use The first SD-card(2GB) to boot,after WII reboot I change the other One (32MB) when there appear GC-channel on WII.

But it doesn't work。

Then I put "swiss(ntsc-j).fzn" onto the Small SD-card. It doesn't work either

How can I do now ?

1 Can I burn SwissFlasher.iso onto DVD. Use DVD to update Swiss0.3 by the DVD-ROM of WII ?

2 Can I use another Fat32 card for change ?


Thank you very much.

[img]IMG_0214.jpg[/img]
[img]IMG_0213.jpg[/img]

do not use ntsc or ntsc-j...both of these are corrupt
only use pal.fzn

Last Night I use pal.fzn too .But don't work

You can Download my two picture.

Thank you very much.

I get exactly the same problem. Did you find a solution?

try using these files: viewtopic.php?p=17633#p17633
watch the video for full instructions


basic instructions:
use swiss r174 iso on WBFS card
during reboot remove WBFS card and insert FAT SD card.
exit WKF device in swiss menu and go to SD GECKO
use swiss to start swissflasher.dol
then select the swissr214.fzn

note: fzn and fzn.fw must be in the same directory



report back your results

I get still get the same results as in those images, except that the error message is in English ("An error has occurred...")

I guess I shouldn't be trying to run Swiss for the GameCube on a Wii. My reason for doing this is to downgrade a WKF to FW 1.0, following the game-changing discovery of autoboot (is there a pun in there?) but my only modded GameCube is a Japanese one. Maybe I'll try and get Swiss running on that, but first I want to have a look at controlling the fan speed and noise.

Thanks for your instructions; I haver a better understandng now.

megalomaniac wrote:report back your results

I've successfully downgraded my WKF to 1.0 on my JPN Cube following your instructions. Thank you.