gc-forever - Gamecube/Wii Forums

Hi, first sry for my bad English ^^;

i got a Gamecube with Viper GC Original and i have a Problem.....i cant Play 2 Disk Games (Backups) i open the Top for change Disk an the Disk Stop NOT.....how i can change the disk?
Give a secret Button Kombo for Disk Stop? xD

Please Help ^^;

Sry for my English ^^;

In the Cobra BIOS, change the lid sensor option to "pass-through" - Let me know if this works. Second option might be to use Swiss on a DVD with pass-through + original lid switch wire in use.

Hi thx for Help ^^
I use the Cobra Bios 2.1 an this Option is only for Original Bios, in Original Bios works nice, BUT Original Bios read not Copys ^^;
What u mean with "Swiss on a DVD with pass-through"?
I have burn Swiss r62 on DVD but i can not change a Disk :/

I'll setup my vipergc tonight and try to remember

Just thought I would mention but there is one game (Resident Evil 0) that won't let you change disc on a Viper modchip and maybe other chips also. Even when using an original copy it won't let you change disc unless you run it through the original BIOS. All other 2 disc games should swap fine though as far as I know.

I test it, the disc stop realy, the gamecube say change disc i open the top, change disc close top, the Gamecube say "read disc...." BUT the drive spin not, i open top Gamecube say "pls close change disc and close top" i close the top, but the Disc spin again not

I test 3 Games with 2 Disk´s but nothing

I thought it were not possible to switch a burned disc ingame with viper/cobra, because the drive needs to be patched again after the drive sequence (spin down,reset,startup) and there is no program to do that.

if you can boot swiss as the first thing in the drive then you should be ok since it can patch the drive for 2 disc games to work.