Swiss/Usage - Revision history

Lumina33: bolded title

2024-07-22T21:27:46Z

bolded title

← Older revision		Revision as of 17:27, 22 July 2024
Line 1:		Line 1:
	[[Swiss]] usage may vary. It can do a lot of things so the aim is to cover the more complex features here.		'''[[Swiss]] usage''' may vary. It can do a lot of things so the aim is to cover the more complex features here.

	==Booting Swiss==		==Booting Swiss==

Haani: gcloader instructions

2020-12-29T21:54:29Z

gcloader instructions

← Older revision		Revision as of 17:54, 29 December 2020
Line 6:		Line 6:
	===Viper GC Extreme Flash===		===Viper GC Extreme Flash===
	There's issues when trying to launch the normal builds of Swiss via the [[Viper GC]] Extreme flash so please use the special Viper DOL provided.		There's issues when trying to launch the normal builds of Swiss via the [[Viper GC]] Extreme flash so please use the special Viper DOL provided.

			==GCLoader==

			0. Download the [https://github.com/emukidid/swiss-gc/releases/ latest release] of Swiss.

			1. Locate the boot.iso file in the GCLoader folder and put it in the root directory of your SD card.

			2. Insert SD card into your GCLoader and boot up as normal.

	==Installing Swiss to the Wiikey Fusion Flash==		==Installing Swiss to the Wiikey Fusion Flash==

Emu kidid: /* Stock firmware (Install Swiss) */

2015-01-07T00:05:24Z

Stock firmware (Install Swiss)

← Older revision		Revision as of 20:05, 6 January 2015
Line 26:		Line 26:
	1. Place the latest [http://www.gc-forever.com/forums/viewtopic.php?f=25&t=1375 Nightly Build] Swiss bootable ISO for your region onto the WBFS formatted SD card using WBFS Manager 4.0.		1. Place the latest [http://www.gc-forever.com/forums/viewtopic.php?f=25&t=1375 Nightly Build] Swiss bootable ISO for your region onto the WBFS formatted SD card using WBFS Manager 4.0.

	2. On another SD card (formatted to FAT32), also place the .FZN and .FZN.FW file from the same archive in Step 0. Place this SD card into a SD adapter and connect it to either Slot A or Slot B of the GameCube.		2. On another SD card (formatted to FAT32), also place the .FZN and .FZN.FW file from the same archive in Step 1. Place this SD card into a SD adapter and connect it to either Slot A or Slot B of the GameCube.

	3. Boot the "Swiss" ISO up on your GameCube via the Wiikey Fusion menu.		3. Boot the "Swiss" ISO up on your GameCube via the Wiikey Fusion menu.

Emu kidid: /* Installing Swiss to the Wiikey Fusion Flash */

2015-01-07T00:00:08Z

Installing Swiss to the Wiikey Fusion Flash

← Older revision		Revision as of 20:00, 6 January 2015
Line 8:		Line 8:

	==Installing Swiss to the Wiikey Fusion Flash==		==Installing Swiss to the Wiikey Fusion Flash==
	Swiss can be installed onto the [[Wiikey Fusion]] flash to act as the main boot menu.		Swiss can be installed onto the [[Wiikey Fusion]] (or clones) flash to act as the main boot menu.
	===Warning===		===Warning===
	It is recommended to only use this if you're booting GameCube games as the file system Swiss supports is FAT32 (4GB file limit so Wii games won't work). The author holds no responsibility for any bricked Wiikey Fusions (although the recovery disc should be able to fix just about everything!).		It is recommended to only use this if you're booting GameCube games as the file system Swiss supports is FAT32 (4GB file limit so Wii games won't work). The author holds no responsibility for any bricked Wiikey Fusions (although the recovery disc should be able to fix just about everything!).
Line 24:		Line 24:
	0. Update the Wiikey Fusion/WASP to the official 1.5 firmware first, and set region override to true.		0. Update the Wiikey Fusion/WASP to the official 1.5 firmware first, and set region override to true.

	1. Place the latest [[http://www.gc-forever.com/forums/viewtopic.php?f=25&t=1375\|Nightly Build]] Swiss bootable ISO for your region onto the WBFS formatted SD card using WBFS Manager 4.0.		1. Place the latest [http://www.gc-forever.com/forums/viewtopic.php?f=25&t=1375 Nightly Build] Swiss bootable ISO for your region onto the WBFS formatted SD card using WBFS Manager 4.0.

	2. On another SD card (formatted to FAT32), also place the .FZN and .FZN.FW file from the same archive in Step 0. Place this SD card into a SD adapter and connect it to either Slot A or Slot B of the GameCube.		2. On another SD card (formatted to FAT32), also place the .FZN and .FZN.FW file from the same archive in Step 0. Place this SD card into a SD adapter and connect it to either Slot A or Slot B of the GameCube.
Line 39:		Line 39:

	====Already running Swiss (Update Swiss)====		====Already running Swiss (Update Swiss)====
	0. From the latest [[http://www.gc-forever.com/forums/viewtopic.php?f=25&t=1375\|Nightly Build]] of Swiss, grab the latest .FZN file and latest Swiss.DOL file (optional)		0. From the latest [http://www.gc-forever.com/forums/viewtopic.php?f=25&t=1375 Nightly Build] of Swiss, grab the latest .FZN file and latest Swiss.DOL file (optional)

	1. Put the files onto a SD(HC/XC) card and insert it into your GameCube Slot A or Slot B via SD adapter		1. Put the files onto a SD(HC/XC) card and insert it into your GameCube Slot A or Slot B via SD adapter

Emu kidid: /* Requirements */

2015-01-06T23:57:58Z

Requirements

← Older revision		Revision as of 19:57, 6 January 2015
Line 12:		Line 12:
	It is recommended to only use this if you're booting GameCube games as the file system Swiss supports is FAT32 (4GB file limit so Wii games won't work). The author holds no responsibility for any bricked Wiikey Fusions (although the recovery disc should be able to fix just about everything!).		It is recommended to only use this if you're booting GameCube games as the file system Swiss supports is FAT32 (4GB file limit so Wii games won't work). The author holds no responsibility for any bricked Wiikey Fusions (although the recovery disc should be able to fix just about everything!).
	===Requirements===		===Requirements===
	2 SD Cards		* 2 SD Cards
	SD card adapter to GameCube memory card slot ([[SDGecko]])
	Wiikey Fusion / WASP		* SD card adapter to GameCube memory card slot ([[SDGecko]])
	GameCube (duh!)
			* Wiikey Fusion / WASP

			* GameCube (duh!)

	===Procedure===		===Procedure===

Emu kidid: /* Installing Swiss to the Wiikey Fusion Flash */

2015-01-06T23:57:27Z

Installing Swiss to the Wiikey Fusion Flash

← Older revision		Revision as of 19:57, 6 January 2015
Line 11:		Line 11:
	===Warning===		===Warning===
	It is recommended to only use this if you're booting GameCube games as the file system Swiss supports is FAT32 (4GB file limit so Wii games won't work). The author holds no responsibility for any bricked Wiikey Fusions (although the recovery disc should be able to fix just about everything!).		It is recommended to only use this if you're booting GameCube games as the file system Swiss supports is FAT32 (4GB file limit so Wii games won't work). The author holds no responsibility for any bricked Wiikey Fusions (although the recovery disc should be able to fix just about everything!).
			===Requirements===
			2 SD Cards
			SD card adapter to GameCube memory card slot ([[SDGecko]])
			Wiikey Fusion / WASP
			GameCube (duh!)

	===Procedure===		===Procedure===
	====Stock firmware====		====Stock firmware (Install Swiss)====
	0. Update to the official 1.5 firmware first, and set region override to true.		0. Update the Wiikey Fusion/WASP to the official 1.5 firmware first, and set region override to true.

	1. Place the ~~"SwissFlasher~~.~~gcm"~~ bootable ISO for your region onto the WBFS formatted SD card using WBFS Manager 4.0.		1. Place the latest [[http://www.gc-forever.com/forums/viewtopic.php?f=25&t=1375\|Nightly Build]] Swiss bootable ISO for your region onto the WBFS formatted SD card using WBFS Manager 4.0.

	2. ~~Boot~~ this ~~"Swiss" ISO up on your~~ GameCube.		2. On another SD card (formatted to FAT32), also place the .FZN and .FZN.FW file from the same archive in Step 0. Place this SD card into a SD adapter and connect it to either Slot A or Slot B of the GameCube.

	3. ~~This will boot~~ up ~~a custom version of Swiss and it should present you with a directory as seen in~~ the ~~picture below.~~		3. Boot the "Swiss" ISO up on your GameCube via the Wiikey Fusion menu.
	~~[[File:wkflash1~~.~~png\|right\|thumb\|235px]]~~

	4. Enter the directory and select the FZN file ~~(USE PAL only, yes, even if your console is NTSC/etc, the others are broken)~~, click on the file and follow the prompts to flash Swiss onto the [[Wiikey Fusion]].		4. This will boot up Swiss, from here in Swiss, navigate to the SD Gecko and select the .FZN file as seen in the step below.

			5. Enter the directory you placed the .FZN and .FZN.FW file in and select the FZN file, click on the file and follow the prompts to flash Swiss onto the [[Wiikey Fusion]].
	[[File:wkflash2.png\|right\|thumb\|235px]]		[[File:wkflash2.png\|right\|thumb\|235px]]
	[[File:wkflash3.png\|right\|thumb\|235px]]		[[File:wkflash3.png\|right\|thumb\|235px]]

	5. Once complete, ~~remember~~ you will need to use a FAT32 formatted SD(HC) card with your ~~wiikey fusion~~!		6. Once complete, power off the GC for a few seconds. Remember you will need to use a FAT32 formatted SD(HC) card with your Wiikey Fusion!

			====Already running Swiss (Update Swiss)====
			0. From the latest [[http://www.gc-forever.com/forums/viewtopic.php?f=25&t=1375\|Nightly Build]] of Swiss, grab the latest .FZN file and latest Swiss.DOL file (optional)

			1. Put the files onto a SD(HC/XC) card and insert it into your GameCube Slot A or Slot B via SD adapter

			2. Boot Swiss by simply starting the GameCube that is already set to run Swiss from the WKF/Wasp.

	~~====Already running Swiss====~~		3. (Optional) Boot up the new Swiss DOL by loading it from the SD adapter in Slot A/B (which was initially booted from the Wiikey Fusion)
	0. ~~Extract~~ the ~~PAL FZN file~~ from ~~inside SwissFlasher.gcm~~ (~~it's just an ISO, so browse it using something like ISOBuster~~)

	1. ~~Put~~ the ~~FZN file and the latest Swiss DOL on your~~ SD~~(HC) card and insert it into your Wiikey Fusion~~		4. Navigate to the SD adapter in Slot A/B.

	2. ~~Boot up~~ the ~~new Swiss DOL on your Wiikey Fusion by running~~ it ~~in Swiss (which was booted from the Wiikey Fusion)~~		5. Select the FZN file and click load - follow the prompts to flash it.

	3. ~~Select~~ the ~~FZN file and click load - follow the prompts to flash it~~.		6. Once complete, power off the GC for a few seconds.

	~~====Alternate Procedure====~~		7. Boot Swiss off the Wiikey Fusion/Wasp, verify the revision number on the main screen is now updated.
	1. ~~Extract~~ the ~~.FZN file from~~ the ~~SwissFlasher.gcm (open it with an ISO browser) and load it in Swiss from a compatible storage device~~.

	==USBGecko as a storage device==		==USBGecko as a storage device==

Emu kidid: /* Stock firmware */

2013-05-15T22:39:25Z

Stock firmware

← Older revision		Revision as of 18:39, 15 May 2013
Line 22:		Line 22:
	[[File:wkflash1.png\|right\|thumb\|235px]]		[[File:wkflash1.png\|right\|thumb\|235px]]

	4. Enter the directory and select the FZN file (~~Use~~ PAL only if ~~there~~ are ~~more than just that one present~~), click on the file and follow the prompts to flash Swiss onto the [[Wiikey Fusion]].		4. Enter the directory and select the FZN file (USE PAL only, yes, even if your console is NTSC/etc, the others are broken), click on the file and follow the prompts to flash Swiss onto the [[Wiikey Fusion]].
	[[File:wkflash2.png\|right\|thumb\|235px]]		[[File:wkflash2.png\|right\|thumb\|235px]]
	[[File:wkflash3.png\|right\|thumb\|235px]]		[[File:wkflash3.png\|right\|thumb\|235px]]

Emu kidid at 22:32, 16 December 2012

2012-12-16T22:32:07Z

← Older revision		Revision as of 18:32, 16 December 2012
Line 45:		Line 45:
	==Booting Games==		==Booting Games==
	Games can be booted via nearly every storage device, simply put the ISO on a device such as the [[SDGecko]] or the original or a backup of the disc in the drive and select it in Swiss.		Games can be booted via nearly every storage device, simply put the ISO on a device such as the [[SDGecko]] or the original or a backup of the disc in the drive and select it in Swiss.

			==Cheats==
			===Format===
			The format of the cheats is GCT - which is the format developed for the Ocarina cheat engine.
			There is also support to use .QCH (Cheat DB for Qoob), but there is no guarantee that these cheats will be translated properly for the Ocarina engine to utilize them.
			===Usage===
			====Auto-load====
			In order for cheats to be auto-loaded, GCT files must be named the exact same as the ISO/GCM with a .gct extension after them.
			For example:
			Metroid Prime.iso
			Metroid Prime.iso.gct
			====Manual Loading====
			If you want to load a .GCT or .QCH, you can click on it in the file explorer and load it up prior to selecting your game.

Emu kidid at 00:04, 25 July 2012

2012-07-25T00:04:24Z

← Older revision		Revision as of 20:04, 24 July 2012
Line 12:		Line 12:
	It is recommended to only use this if you're booting GameCube games as the file system Swiss supports is FAT32 (4GB file limit so Wii games won't work). The author holds no responsibility for any bricked Wiikey Fusions (although the recovery disc should be able to fix just about everything!).		It is recommended to only use this if you're booting GameCube games as the file system Swiss supports is FAT32 (4GB file limit so Wii games won't work). The author holds no responsibility for any bricked Wiikey Fusions (although the recovery disc should be able to fix just about everything!).
	===Procedure===		===Procedure===
			====Stock firmware====
			0. Update to the official 1.5 firmware first, and set region override to true.

	1. Place the "SwissFlasher.gcm" bootable ISO for your region onto the WBFS formatted SD card using WBFS Manager 4.0.		1. Place the "SwissFlasher.gcm" bootable ISO for your region onto the WBFS formatted SD card using WBFS Manager 4.0.

Line 19:		Line 22:
	[[File:wkflash1.png\|right\|thumb\|235px]]		[[File:wkflash1.png\|right\|thumb\|235px]]

	4. Enter the directory and select the FZN file ~~for your region~~, click on the file and follow the prompts to flash Swiss onto the [[Wiikey Fusion]].		4. Enter the directory and select the FZN file (Use PAL only if there are more than just that one present), click on the file and follow the prompts to flash Swiss onto the [[Wiikey Fusion]].
	[[File:wkflash2.png\|right\|thumb\|235px]]		[[File:wkflash2.png\|right\|thumb\|235px]]
	[[File:wkflash3.png\|right\|thumb\|235px]]		[[File:wkflash3.png\|right\|thumb\|235px]]
Line 25:		Line 28:
	5. Once complete, remember you will need to use a FAT32 formatted SD(HC) card with your wiikey fusion!		5. Once complete, remember you will need to use a FAT32 formatted SD(HC) card with your wiikey fusion!

	===Alternate Procedure===		====Already running Swiss====
			0. Extract the PAL FZN file from inside SwissFlasher.gcm (it's just an ISO, so browse it using something like ISOBuster)

			1. Put the FZN file and the latest Swiss DOL on your SD(HC) card and insert it into your Wiikey Fusion

			2. Boot up the new Swiss DOL on your Wiikey Fusion by running it in Swiss (which was booted from the Wiikey Fusion)

			3. Select the FZN file and click load - follow the prompts to flash it.

			====Alternate Procedure====
	1. Extract the .FZN file from the SwissFlasher.gcm (open it with an ISO browser) and load it in Swiss from a compatible storage device.		1. Extract the .FZN file from the SwissFlasher.gcm (open it with an ISO browser) and load it in Swiss from a compatible storage device.

Emu kidid: /* Procedure */

2012-07-24T10:14:19Z

Procedure

← Older revision		Revision as of 06:14, 24 July 2012
Line 24:		Line 24:

	5. Once complete, remember you will need to use a FAT32 formatted SD(HC) card with your wiikey fusion!		5. Once complete, remember you will need to use a FAT32 formatted SD(HC) card with your wiikey fusion!

			===Alternate Procedure===
			1. Extract the .FZN file from the SwissFlasher.gcm (open it with an ISO browser) and load it in Swiss from a compatible storage device.

	==USBGecko as a storage device==		==USBGecko as a storage device==