Enhanced mGBA
Jump to navigation
Jump to search
| Information | |
|---|---|
| Author(s) | Extrems |
| Type | Handheld emulator |
| Version | Rolling release |
| Licence | Freeware |
| Links | |
|
Main download Extra download | |
| Website | |
| Discussion | |
| Source | |
Enhanced mGBA (emGBA) is an enhanced port of the Game Boy Advance emulator, based on Game Boy Interface Standard Edition.
Options
--aspect=<w:h>- Specify screen aspect ratio. The default is the Progressive Scan Mode system setting (4:3 or 16:9).
--offset=<x:y>- Set offset. The default is the Screen Position system setting (-32 to +32).
--zoom=<x:y>- Set zoom. The default is the Game Boy Player Start-up Disc's Screen Size setting (2.0 or 2.375).
--rotate=<0-359>- Set rotation (default: 0).
--poll=<0-11>- Set controller polling rate.
0: VSync (most compatible) 1: 1000Hz (default) 2: 500Hz 3: 350Hz 4: 300Hz 5: 250Hz 6: 200Hz 7: 150Hz 8: 150Hz 9: 125Hz 10: 125Hz 11: 100Hz
--cursor=<path>,--no-cursor- Load texture palette (default: point.tpl.gz).
--overlay=<path>,--no-overlay- Load texture palette (default: frame.tpl.gz).
--overlay-id=<ID>- Set texture palette index. The default is the Game Boy Player Start-up Disc's Frame setting (0 to 19).
--overlay-scale=<x:y>- Set texture scale (default: auto).
--filter=<[none|blend|deflicker|scale2x[ex|plus]|eagle2x|scan2x|normal2x][,prescale|no-prescale]>- Set image doubling filter. The default is the Game Boy Player Start-up Disc's Screen Filter setting (none, blend, deflicker).
prescale,no-prescale- Enable prescaling filter. The default is on for non-doubling filters.
--dither=<none|threshold|bayer8x8|bayer4x4|bayer2x2|cluster8x8|cluster4x4>- Set dithering algorithm (default: threshold).
--scaler=<nearest|bilinear|oversample|box>- Set image scaling filter (default: bilinear).
--matrix=<identity|gba|gbc|gbi|nds|palm|psp|vba>- Set color matrix (default: gbi).
identity: Identity matrix gba: Game Boy Advance (by Pokefan531) gbc: Game Boy Color (by Pokefan531) gbi: Game Boy Interface nds: Nintendo DS (by Pokefan531) palm: Palm Treo 700p (by Pokefan531) psp: PlayStation Portable (by Pokefan531) vba: VisualBoyAdvance-M (by Pokefan531)
--input-gamma=<red[:green[:blue]]>- Set gamma (default: 2.2).
--output-gamma=<1.0|1.7|2.2>- Specify screen gamma (default: 2.2).
--contrast=<red[:green[:blue]]>- Set gain (default: 1.0).
--brightness=<red[:green[:blue]]>- Set lift (default: 0.0).
--format=<ntsc|pal|pal-m|ntsc-50|pal-60|custom|custom-m|hd60|hd50|hd48|hdcustom>- Set video format. The default is the Video Mode system setting (ntsc, pal-60, pal-m).
--scan-mode=<[interlace|quasi-interlace|non-interlace|non-progressive|progressive][,clock2x|no-clock2x][,size2x|no-size2x]>- Set scan mode. The default is the Progressive Scan Mode system setting (interlace or progressive).
interlace: 15 or 18-22kHz interlace quasi-interlace: 15 or 18-22kHz segmented frame non-interlace: 15 or 18-22kHz progressive non-progressive: 31 or 27-33kHz interlace progressive: 31 or 27-33kHz progressive
clock2x,no-clock2x- Enable 27MHz pixel clock (default: auto). Enabling doubles the refresh rate for
interlacemodes. Disabling halves the refresh rate forprogressivemodes. - This only works with the Nintendo GameCube Component Video Cable.
size2x,no-size2x- Enable 2x video oversampling (default: auto). Enabling halves the refresh rate.
- This only works with the Nintendo GameCube Component Video Cable.
--ipv4-address=<aaa.bbb.ccc.ddd>- Set static IPv4 address.
--ipv4-gateway=<aaa.bbb.ccc.ddd>- Set static IPv4 gateway.
--ipv4-netmask=<aaa.bbb.ccc.ddd>- Set static IPv4 netmask.
--network,--no-network- Enable Broadband Adapter features (default: yes).
<path>- Load ROM.