Diego's right, if your red wires go straight under the adaptor, there are many errors, no need for pin 9 and 8 to be connected, while 7 and 6 may be needed. But you can keep the connector and red wires, it makes for easier disassembling. thanks for help me I pull out the red wires and pin 9, now wh...

Just skip it. Trying the setup with an SD Gecko first would be wise. ;) guys I'm done... I tried different things and the result is the same I make a New Sd gecko connected to main board in memory card B with this diagram I tried connecting with SD pin 9 and without it https://images.app.goo.gl/2i5...

try one with 25 volts. the same 22uf, 25volts .. I did it only worked with a 22uf 50 volt capacitor. but I think 25 volts is enough for you. solder near the adapter. but I think the problem is in the settings ... In addition to replacing the capacitor, try using the SD gecko to access SP2 to be sur...

yes, in Dol 101 maybe are different

Diego borella wrote: ↑Thu Mar 26, 2020 7:16 pmdid you use the capacitor?

do You mean this? 22uf 10v? yes

Spoiler

Show

https://console5.com/store/22uf-10v-min ... -more.html

Why is your autoexec.dol only 900kB? It should be the last swiss.dol renamed, unless you want to boot to another homebrew (gbi, or whatever…) It should work with the SD card in an SD Gecko as well, if you have one. The reddit you pointed to states fake informations: Loading via SP2 connection can't...

First make sure the boot forwarder you put on your Memcard is SD2SP2 compatible. Maybe you just put an iplboot.dol on your Memcard and forgot to put SWISS.dol as ipl.dol at the root of your SD card. :P Maybe there is an error in the pin namings as with the Dol-001 connector that leads to mismatch i...

Hello guys I spend my time trying to launch homebrew in my GC and... this not work for me why??? :x this is what I did: 1: I Put sd2sp2 to my GC in some soldering points, with a memory card in slot A with Boot.dol and Super Smash B.M exploit (DOL-GALE-0-02.gci) when I go to vs mode/enter name my GC ...