Hi emukid. Im still around. Thanks for the feedback for the adapter. will improve it. I just need some time do test it.

ya sm4rty...Received...the board working. Thanks alot.

This initial stage tutorial are made only for Emu-Kidid who on testing on my adaptor. https://www.gc-forever.com/forums/download/file.php?id=3113 https://www.gc-forever.com/forums/download/file.php?id=3114 Soldered it. https://www.gc-forever.com/forums/download/file.php?id=3115 https://www.gc-foreve...

ya. A service manual is to repair a broken gamecube. I need the service manual so I can repair my broken Gamecube. It does power on but there is no Sound and Display from the TV. that happen after I accidently dropped my GC mainboard o the floor.

I want to ask:
Is there exist of Gamecube Service Manual?
Coz im searching over the net, but found nothing.

http://www.youtube.com/watch?v=iUe4I67vnH0

Video requested by zenloc.
Zenloc...Great to hear that you made your disk drives read the backup.

zenloc, use 2.8A (Read only) WODE firmware. Tonight i try to upload the video.

Forgot to tell u guys....I plug my disk drive to WODE and run Flat Mode.

Thanks Ashen....big success. I manage to get my wii disk drive to work. It can read both original GC games and Mini DVD-r GC disc. It even can go ingame playing. Im so happy now....later i'll try to burn into Full size DVD-r GC Disc to test.

Ashen, does the 23(wii)->12(GC) on/off switch act as eject switch for Wii disk drive?
I have succesfully make my gamecube work with WODE. now im going to try with Wii disk drive.

Out of region games works.

I can use WODE FW 2.8B but it load iso slower than 2.00.

I have try FW1.28....It can't load the wode cfg.
I can load linux with FW2.00 and above. It can boot wode cfg. We must first be sure that the Game Patching in wode setting is off else we get "disc can't read". I have tested with my DOL-001 USA. don't know the other.

Big found Ashen. Make sure the WODE setting Game Patching is turned OFF or u might getting "disc could not be read". I played the games with WODE firmware 2.8B. You may put it to your tutorial to let everyone know.

Ok....i'll try. BTW...my gamecube model is DOL-001(USA)...I see in Ashen compatibility guide, its looks like it is incompatible right?

I don't have WiikeyFusion. Im intent to use WODE at the first place...hehe...

Guys, again...need ur help. I power up my set up with , Lid swith (12->23) short, Wii pin 29 short to gnd. I update WODE firmware to 1.28, it can't read in the cfg.iso (WODE). Once I update 2.00 and above, I manage to boot into Linux (Autoboot cfg.iso) and enter the black screen (with white words) t...

Guys, Lid Switch, 12 -> 23 need to be connector (for wode user), or need a on/off switch in between it?

Host Power SH connector. 12 way. 12v,12v,gnd,gnd,5v,5v,gnd,gnd,3v3,3v3,gnd,gnd.

I mean the power supply. the WODE needed 12v, 5v, 3.3v, and gnd for supply. im thinking a good way to connect the supply to the WODE.
hehe....sorry for any language misunderstanding.....

Planing to. but i need to test it to make sure it works. actualy this solder board was same as XENOGC soldering. now im thinking a way to supply the WODE board. A lot of test i wanna do like, keeping the existing mini DVD optical drive parallel with the WODE, and use Wii DVD drives out of the WODE m...

With Ashen info I finally came out with this. compact and neat design. I plan to install to install WODE. Will try make it up n install it to test.