how to flash Xecuter 2.6 CE without programmer

Anything before or after the GameCube!
Post Reply
andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

how to flash Xecuter 2.6 CE without programmer

Post by andre104623 » Tue Jun 30, 2015 2:09 pm

My son and I got back from too many games convention with 2 xboxs. One had a surprise inside a Xecuter 2.6 CE but it wasn't working so I removed the chip and found out that the chip is blank and I have no programmer so is that a way to program this Modchip because from what I heard this chip can support LCD screen! So I would really like to get this working. Any help would be appreciated
User avatar
emu_kidid
Site Admin
Posts: 4376
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: how to flash Xecuter 2.6 CE without programmer

Post by emu_kidid » Tue Jun 30, 2015 11:39 pm

Sounds like a hot swap job is needed.
Image
andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: how to flash Xecuter 2.6 CE without programmer

Post by andre104623 » Wed Jul 01, 2015 12:42 am

emu_kidid wrote:Sounds like a hot swap job is needed.
So softmod with Modchip out then run hexen tool and connect Modchip then try to flash? It says it has 2 banks so can I run 2 bios
User avatar
Madowax
Posts: 9
Joined: Thu Jun 11, 2015 2:09 am
Location: Italy

Re: how to flash Xecuter 2.6 CE without programmer

Post by Madowax » Wed Jul 01, 2015 12:56 am

http://www.modchipcentral.com/store/pro ... ctid=17807

They still got the programmer in stock if it's correctly updated. Take a look.
andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: how to flash Xecuter 2.6 CE without programmer

Post by andre104623 » Wed Jul 01, 2015 1:19 am

Madowax wrote:http://www.modchipcentral.com/store/pro ... ctid=17807

They still got the programmer in stock if it's correctly updated. Take a look.
I would rather not spend money if I dont have to.
User avatar
Madowax
Posts: 9
Joined: Thu Jun 11, 2015 2:09 am
Location: Italy

Re: how to flash Xecuter 2.6 CE without programmer

Post by Madowax » Wed Jul 01, 2015 1:33 am

You don't have too, softmod the Xbox and use flashbios to flash it, you can flash it from hard drive or dvd. Plenty of nice tutorials still around. Nice modchip you got for free. Gratz.
User avatar
emu_kidid
Site Admin
Posts: 4376
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: how to flash Xecuter 2.6 CE without programmer

Post by emu_kidid » Wed Jul 01, 2015 1:35 am

Yeah, plug it in after the console has booted up but before any homebrew is run.

Why is it blank though, are you sure it's not a dead flash?
Image
User avatar
Madowax
Posts: 9
Joined: Thu Jun 11, 2015 2:09 am
Location: Italy

Re: how to flash Xecuter 2.6 CE without programmer

Post by Madowax » Wed Jul 01, 2015 1:42 am

It should have the option for 2x 512k BIOS, dip switch selectable, if I'm not mistaken, are they both blank?
User avatar
Madowax
Posts: 9
Joined: Thu Jun 11, 2015 2:09 am
Location: Italy

Re: how to flash Xecuter 2.6 CE without programmer

Post by Madowax » Wed Jul 01, 2015 1:48 am

Image

uploadfromtaptalk1435715322396.jpg
(122.83 KiB) Not downloaded yet
andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: how to flash Xecuter 2.6 CE without programmer

Post by andre104623 » Wed Jul 01, 2015 10:37 am

I might be dealing with a dead chip I won't know till tomorrow. Hopefully I can get it working I got lights on the controller but the dumbass that installed it before pinched the wires going to the remote. I'm going to fix all the wires then install in my newly TSOP flashed 1.2 Xbox then flash. Well that's the plan.

I ripped the ram out of the 1.0 Xbox and there a little different same numbers besides the 1.0 one has a M and the 1.2 has a F that won't cause any incapability will it?

I understand why this chip was in this Xbox. Once I removed it the Xbox would no longer boot why you ask because the fuckers were using it to replace the hard drive without keys. So when I removed the chip it throws a error light. Fucking dumbasses they bought a 40 dollar Modchip to fix a 20 dollar Xbox very smart
User avatar
Madowax
Posts: 9
Joined: Thu Jun 11, 2015 2:09 am
Location: Italy

Re: how to flash Xecuter 2.6 CE without programmer

Post by Madowax » Wed Jul 01, 2015 4:06 pm

andre104623 wrote:
I understand why this chip was in this Xbox. Once I removed it the Xbox would no longer boot why you ask because the fuckers were using it to replace the hard drive without keys. So when I removed the chip it throws a error light. Fucking dumbasses they bought a 40 dollar Modchip to fix a 20 dollar Xbox very smart
If the Xbox booted fine with the modchip in it and it doesn't anymore now, that you removed it, the chip was working fine. Only with a modded bios flashed on the chip, you can boot an unlocked drive on an xbox with the original MS bios, if I remember it correctly. So the 2.6 it's working, that's nice!
User avatar
keropi
Posts: 167
Joined: Sun Jun 16, 2013 9:41 pm

Re: how to flash Xecuter 2.6 CE without programmer

Post by keropi » Wed Jul 01, 2015 8:36 pm

You need to hotswap with another modchip, if you boot with onboard bios (tsoped or softmod) then you can't flash a modchip.
andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: how to flash Xecuter 2.6 CE without programmer

Post by andre104623 » Wed Jul 01, 2015 9:38 pm

keropi wrote:You need to hotswap with another modchip, if you boot with onboard bios (tsoped or softmod) then you can't flash a modchip.
Great that's all I got right now is a 1.2 xbox TSOP flashed with IND-BIOS
User avatar
Madowax
Posts: 9
Joined: Thu Jun 11, 2015 2:09 am
Location: Italy

Re: how to flash Xecuter 2.6 CE without programmer

Post by Madowax » Thu Jul 02, 2015 1:04 am

You can install the modchip on the tsop flashed Xbox, turn the x2.6 off with the dipswitch and boot from the tsop, once the hacked dashboard is running, turn the modchip on and start flashbios it should let you flash the xecuter in that way.
andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: how to flash Xecuter 2.6 CE without programmer

Post by andre104623 » Thu Jul 02, 2015 3:48 am

Madowax wrote:You can install the modchip on the tsop flashed Xbox, turn the x2.6 off with the dipswitch and boot from the tsop, once the hacked dashboard is running, turn the modchip on and start flashbios it should let you flash the xecuter in that way.
Cool thank you when I get setup a bit I will install the modchip I have it removed already and in a antistatic bag. I must rewire the connector that goes to the remote first then find some pinheaders I know I have some around. This is the reason I need to clean
User avatar
Madowax
Posts: 9
Joined: Thu Jun 11, 2015 2:09 am
Location: Italy

Re: how to flash Xecuter 2.6 CE without programmer

Post by Madowax » Thu Jul 02, 2015 6:56 am

Image

The d0 point should let you switch from tsop flashing to chip flashing and viceversa, if disconnected, your flash program should see the tsop chip, if connected the modchip one, just double check which nand the flasher discover before flashing. I have done this a couple of time, back in the days, to do the reverse operation you are trying, flash the tsop while booting from a modchip and it worked no problem. If someone remembers it differently please correct me, it was a long time ago and maybe I remember it wrong.
User avatar
keropi
Posts: 167
Joined: Sun Jun 16, 2013 9:41 pm

Re: how to flash Xecuter 2.6 CE without programmer

Post by keropi » Thu Jul 02, 2015 11:09 pm

Madowax wrote:You can install the modchip on the tsop flashed Xbox, turn the x2.6 off with the dipswitch and boot from the tsop, once the hacked dashboard is running, turn the modchip on and start flashbios it should let you flash the xecuter in that way.
that will not work unfortunately
Post Reply