Swiss 0.1

YouTube · Post by **emu_kidid** » Thu Nov 17, 2011 10:02 pm

WiiPower, you could stick that code anywhere and branch to it, perhaps over a few of the unused video timings, or over some useless UART function/etc. I was going to write my own way to do it but this way just works so I left it as-is. I do need to try a few other games which don't want to force such as 007 Nightfire (but I wasn't sure if it was cause it reloaded other DOL's).

WiiPower · Post by **WiiPower** » Fri Nov 18, 2011 7:12 am

emu_kidid wrote:WiiPower, you could stick that code anywhere and branch to it, perhaps over a few of the unused video timings, or over some useless UART function/etc. I was going to write my own way to do it but this way just works so I left it as-is. I do need to try a few other games which don't want to force such as 007 Nightfire (but I wasn't sure if it was cause it reloaded other DOL's).

I think all the 007 games reload some .dol or .elf, so if you didn't add the 480p patch into the prepatcher, that's most likely the reason why it does not work. Hmm, now that i think about it, i want a solution that survives reload processes, which means i need tons of free memory.

tonyXS · Post by **tonyXS** » Sat Nov 26, 2011 7:00 am

hey hey guys, i only want to say "thanks" Emu kid and for your effort i am thankful with you , always do your best man n_n, i speak spanish and is some difficult to writte in olther lengue , sorry if i writte bad or something like that

Rage518 · Post by **Rage518** » Sat Nov 26, 2011 7:10 pm

Thanks for answering my question about wind waker on wii guys

roubagalinhas · Post by **roubagalinhas** » Sat Nov 26, 2011 10:52 pm

i've completed the game without using the dungeon map

if i'm not mistaken i only missed two treasure chests

sakamoto · Post by **sakamoto** » Sat Dec 03, 2011 6:09 pm

booting emulators from tantric with swiss doesnt work 100%. emulators boot fine with sdload without memory issues. with swiss, emulotors work but gameplay is always choppy?

i tried it with latest version available for viper (r62) on this forum and latest version available on googlecode (r83)... same results

YouTube · Post by **emu_kidid** » Sun Dec 04, 2011 11:47 am

Yes I've noticed there's also no audio from the later versions of the emulator, I need to look into it.. sounds like I'm not de-initializing something properly.

computerboy · Post by **computerboy** » Mon Dec 05, 2011 8:18 pm

I was wondering if you could guide me to the right direction, Emulator Kid...

What I wanted to do was modify Swiss (for myself) whereby I can load a specific (hard coded) file so instead of being presented with a GUI, I would just load the game that has been hardcoded into the source to load a game from SD Gecko. Using this, I can then modify Wii Swiss Booter (thanks for the source, WiiPower) to boot said .dol so that I can go directly to a GameCube game.

This is so I can create a channel on my Wii for every specific GameCube game on my SD Card (maybe with some animated banners too!).

Sure its a pain when an update is made by yourselves to the Swiis source, but meh. You can't have everything! I'm just hoping to recompile everything!

Thanks.

YouTube · Post by **emu_kidid** » Mon Dec 05, 2011 10:28 pm

computerboy, just look at select speed, select slot functions/etc and the device mapping and do everything the GUI does without user actions.. I think it'd be easier to wait for me to add support as I've been meaning to get around to it for a while now.. :p

How do the loaders pass in params, via argv,argc? If so, which array slot do they use?

Post by **liquitt** » Mon Dec 05, 2011 10:28 pm

computerboy wrote:Emulator Kid...

Naxil · Post by **Naxil** » Thu Dec 08, 2011 1:21 am

hi... i have SDgecko with wii..
I have try 2 different backup of WIndWAKER but not start ...
the video remain in blackscreen and nothing appen..
Animal Crossing Run perfectly..
any help??
I start swiss with wiipower "swiss boot" 0.3 or with WIIXplorer

computerboy · Post by **computerboy** » Fri Dec 09, 2011 10:13 pm

That's great news, Emulator Kid.

I will wait for your official version in that case. Thanks.

WiiPower · Post by **WiiPower** » Sat Dec 10, 2011 7:23 pm

@emu_kidid:
Why???

Seriously, why?

1. http://code.google.com/p/swiss-gc/wiki/Compiling

Is step 2 still required? I skipped it and it still worked, so i guess the code is more user friendly now.

Step 3, overwrite stuff in my libogc folder, so other stuff gets compiled differently? Is this still required, or is "-Wl,--section-start,.init=0x81300000" in the makefile a change that made it unnecessary? Anyways, why not something like this:
LDFLAGS = -g $(MACHDEP) -Wl,-Map,$(notdir $@).map -Wl,--section-start,.init=0x81300000 -T../../linker-script/vgcogc.ld

Then it wouldn't be necessary to change it in the devkit folder.

Step 4, again overwrite stuff in my libogc folder? How about:
LIBDIRS := $(DEVKITPPC)/lib $(CURDIR)
and changing the makeme.bat, so it builds the lib, and copies the .a file into the lib folder from Swiss.

2. Didn't i tell you that i did not know which of the 2 patches for Wind Waker belongs to which version of the game? I traced down the problem, zeldaVAT gets correctly set to 1 for my PAL disc, and the patch pattern is named GXSETVAT_PAL_orig. But my extracted main.dol contains the pattern from GXSETVAT_NTSC_orig.

If Swiss was compilable right out of the box, i would have found this months ago. I seriously thought that it was some complicated bug.

YouTube · Post by **emu_kidid** » Sun Dec 11, 2011 12:26 am

@WiiPower

1. Step 2 is required if you're building MODIFIED assembly routines to read from SD or IDE-EXI. I've updated the compiling guide to reflect this.

The linker script vgcogc was only ever used by GCOS as far as I can recall.. but sure, when I get some time I can fix that too, same goes for your step 4 changes..

2. Nice find, I haven't had the time/energy to look that up, nor do I have NTSC Zelda WW.

sakamoto · Post by **sakamoto** » Sun Dec 11, 2011 12:27 am

i have troubles booting following games:

- metroid prime 1 (completely crashed with a swiss code dump)
- star fox adventures (freezes with internal gamecube error message in the gamemenu)

are both games confirmed not to work with the current swiss revision?

edit: i meant star fox adventures instead of assault

YouTube · Post by **emu_kidid** » Sun Dec 11, 2011 1:50 am

sakamoto, current being r62?

For metroid, use low level, low memory patch location

sakamoto · Post by **sakamoto** » Sun Dec 11, 2011 7:13 am

default settings (low level/low memory) should indeed work, however ntsc version is broken in r83:

Metroid Prime PAL works with swiss r62 and swiss r83
Metroid Prime NTSC works with swiss r62 but broken in r83 (results in stack code dump)

i also noticed that Legend of Zelda Ocarina of Time PAL (multi pack) does not work with swiss r62 and 83. the game should boot fine after swiss' pre-patching according to the wiki. i used a clean image and received twice the message (internal error occured. pls reboot your gamecube)

YouTube · Post by **emu_kidid** » Sun Dec 11, 2011 8:29 am

interesting finds sakamoto, I will look at them this week..

julius · Post by **julius** » Sun Dec 11, 2011 6:39 pm

He he, it seems sakamoto has my same problem with Zelda Ocarina of Time/Master Quest, but mine is NTSC version. Any solution for this issue?

sakamoto · Post by **sakamoto** » Sun Dec 11, 2011 7:28 pm

it seems like audio streaming games (Zelda Ocarina of Time and StarfoxAdventures) are broken in latest releases as from r62. i only have those 2 audio streaming games in my possession to test swiss.

YouTube · Post by **emu_kidid** » Mon Dec 12, 2011 12:01 pm

sakamoto, I've found the issue, and fixed it in r85.. release pending soon once I fix a few things.

sakamoto · Post by **sakamoto** » Mon Dec 12, 2011 8:24 pm

'emulator kid' is god

good job

YouTube · Post by **emu_kidid** » Tue Dec 13, 2011 10:05 pm

could someone with the ability to build Swiss please try r89 with Windwaker on Wii and the dungeon map issue?

following comments from WiiPower, it indeed was the case that I had the PAL/NTSC patches swapped around.

sakamoto · Post by **sakamoto** » Tue Dec 13, 2011 11:34 pm

i will compile latest release tomorrow evening (Belgian time) and provide you with feedback. windwaker PAL did not have the dungeon map bug with release 84 afaik.

panmusic · Post by **panmusic** » Wed Dec 14, 2011 6:09 am

Emu-kidid,how far are we from the next official release?
-Have you solved the Luigi's Mansion issue yet?
-Are the PAL 50hz games now completely patchable to display in 480p?(BG&E,PoP games,Skies of Arcadia etc.)

Finally,is it possible to upload for us the last revision for testing?

Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1