
QOOB Pro loading problems.
- Air Conditioner
- Posts: 111
- Joined: Wed Jan 25, 2012 2:40 am
QOOB Pro loading problems.
I recently got my QOOB pro installed with 3c BIOS into my GC and I loaded Swiss 1.0 rev94 onto the on-board memory. I loaded Swiss and all was good until I attempted to load a game off of my SD card via SD Gecko. Slot A lets me access the .ISO and when I load it always stops at 66% patching. The game specifically is SSBM. Patch=low, memory=low. Slot B though dosn't even let me access the SD period. What is my problem? 

Formerly Mizumi
Re: QOOB Pro loading problems.
Two things:
1. Do you have a BBA installed? If so, please remove it as Swiss is trying to initialize it and it interferes with SD Gecko randomly.
2. Do you have a disc in the drive? 66% drive patching is when Swiss is trying to initialize a DVD disc for you, but if you don't have one, it might endlessly sit there waiting for it. Try booting with a disc in the drive and when you power on the Gamecube, hold Y down to go straight to the Flash menu.
1. Do you have a BBA installed? If so, please remove it as Swiss is trying to initialize it and it interferes with SD Gecko randomly.
2. Do you have a disc in the drive? 66% drive patching is when Swiss is trying to initialize a DVD disc for you, but if you don't have one, it might endlessly sit there waiting for it. Try booting with a disc in the drive and when you power on the Gamecube, hold Y down to go straight to the Flash menu.

- Air Conditioner
- Posts: 111
- Joined: Wed Jan 25, 2012 2:40 am
Re: QOOB Pro loading problems.
So to boot a game via SD card you need the DD? And may I ask what BBA is?
Formerly Mizumi
Re: QOOB Pro loading problems.
If you don't know what a BBA (Broad Band Adapter) is, then it's not the problem 
There is a "No Disc Mode" coming up very shortly that doesn't require a DVD in the drive (or a drive at all in certain cases). Stay tuned for it!

There is a "No Disc Mode" coming up very shortly that doesn't require a DVD in the drive (or a drive at all in certain cases). Stay tuned for it!

- Air Conditioner
- Posts: 111
- Joined: Wed Jan 25, 2012 2:40 am
Re: QOOB Pro loading problems.
Darn. I really need no disc mode for my portable. Not trying come off gay and noobish but could I beta test? Or is there any other HB loader that allows me to not have the DD other than WKF? I couldn't find much on it.
Formerly Mizumi
Re: QOOB Pro loading problems.
hmmmm... I didn't knew the BBA interfered with swiss, good to know
Re: QOOB Pro loading problems.
iggunr, only in recent builds around 0.2 r94 or so. It serves a webpage if you access it on the IP it shows you http://ip/ but I plan to add more useful behaviour to it once it's not screwing up SD access.
Mizumi, should have a build ready by next week some time - no rush
Mizumi, should have a build ready by next week some time - no rush


Re: QOOB Pro loading problems.
thats kinda like what we all doMizumi wrote:could I beta test?

please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
- Air Conditioner
- Posts: 111
- Joined: Wed Jan 25, 2012 2:40 am
Re: QOOB Pro loading problems.
I seemed to have picked tje right week to make a GCP! Will the DD less mode support slot A and B?emu_kidid wrote:iggunr, only in recent builds around 0.2 r94 or so. It serves a webpage if you access it on the IP it shows you http://ip/ but I plan to add more useful behaviour to it once it's not screwing up SD access.
Mizumi, should have a build ready by next week some time - no rush
Formerly Mizumi
- Air Conditioner
- Posts: 111
- Joined: Wed Jan 25, 2012 2:40 am