Swiss 0.1
Re: Swiss 0.1
Kemosabe, try r24 to resolve the file deletion issue.
to switch discs, read the first post where it talks about using 2 disc games.
to switch discs, read the first post where it talks about using 2 disc games.

-
- Posts: 30
- Joined: Mon Feb 07, 2011 11:11 am
- Location: Portugal
Re: Swiss 0.1
I know how to switch discs with Swiss (I've tried it and it seems to work just fine). I was asking about SDbot, in case there's some game I absolutely can't play with Swiss. I'll try r24 when I get home and I'll post the results.emu_kidid wrote:Kemosabe, try r24 to resolve the file deletion issue.
to switch discs, read the first post where it talks about using 2 disc games.
I tested a few more games yesterday:
- Baldur's Gate PAL - WORKS, there's no improvement over SDboot, it has the same sound glitches but it's perfectly playable.
- Baten Kaitos - WORKS, it's slightly worse than SDboot. Sound glitches during FMV, ocasional glitches and slowdowns during game, but not in battle, especially in the map screen. There's no music during battles (I have music with SDboot)
Re: Swiss 0.1
Ok, my black screen issues are fixed now, but i don't see which change did it. I fear that the error is related to something else and might appear again eventually.
About Baten Kaitos, can you report back if you actually played it instead of just testing? I wouldn't be surprised if it gets random freezes after ~10-30 min into gameplay. Just based on my experience with NeoGamma.
About Baten Kaitos, can you report back if you actually played it instead of just testing? I wouldn't be surprised if it gets random freezes after ~10-30 min into gameplay. Just based on my experience with NeoGamma.
Re: Swiss 0.1
yes. that fixed it! i can play mario kart double dash from sd with 16 mhz selected. i'll test all my games right now.
thanks emu!
thanks emu!
-
- Posts: 30
- Joined: Mon Feb 07, 2011 11:11 am
- Location: Portugal
Re: Swiss 0.1
I played about 15min or so, did a few battles.WiiPower wrote:Ok, my black screen issues are fixed now, but i don't see which change did it. I fear that the error is related to something else and might appear again eventually.
About Baten Kaitos, can you report back if you actually played it instead of just testing? I wouldn't be surprised if it gets random freezes after ~10-30 min into gameplay. Just based on my experience with NeoGamma.
To solve your black screen issues did you need to select 16mhz, Or is 32mhz fine? I still need to test the new rev24 as soon as I have some time.
Re: Swiss 0.1
Did work with 32mhz right away. But i really don't understand why it does work now.
Re: Swiss 0.1
Rev24 fixed the black screen issue!
Thanks emu_kidid! There's still one problem, most of my SD Cards only work when I select 16Mhz.
Does anyone else have this problem?
Thanks emu_kidid! There's still one problem, most of my SD Cards only work when I select 16Mhz.
Does anyone else have this problem?
Re: Swiss 0.1
Not that i know of. What cards do you have? And which ones only work with 16mhz, which do work with 32mhz?Chun-kun wrote:Rev24 fixed the black screen issue!
Thanks emu_kidid! There's still one problem, most of my SD Cards only work when I select 16Mhz.
Does anyone else have this problem?
Re: Swiss 0.1
I have:
SanDisk (Class 2) 2Gb - 16 Mhz
Optimo 2Gb - 32 Mhz
Lexar 2Gb - 16 Mhz
Kingston 512mb - 16 Mhz
SanDisk (Class 2) 2Gb - 16 Mhz
Optimo 2Gb - 32 Mhz
Lexar 2Gb - 16 Mhz
Kingston 512mb - 16 Mhz
Re: Swiss 0.1
Somebody knows a good tool for speed tests on sd cards? To me it looks like it could be speed related if 32 or 16mhz will work, which sounds really bad to me.Chun-kun wrote:I have:
SanDisk (Class 2) 2Gb - 16 Mhz
Optimo 2Gb - 32 Mhz
Lexar 2Gb - 16 Mhz
Kingston 512mb - 16 Mhz
- safefortheozone
- Posts: 22
- Joined: Mon May 10, 2010 7:41 pm
Re: Swiss 0.1
R24 fixed all of the black screen issues for me. Everything is working fine in 32mhz.
Thanks emu_kidid
Thanks emu_kidid

Re: Swiss 0.1
Great!
Tomorrow I will try Zelda Four Swords Advanture (Japan).
May the Tetra's Tracker (Navi's Tracker) works with the Swiss loader.
I think this will be quite a milepoint.
Adr990
Tomorrow I will try Zelda Four Swords Advanture (Japan).
May the Tetra's Tracker (Navi's Tracker) works with the Swiss loader.
I think this will be quite a milepoint.

Adr990
Re: Swiss 0.1
SD cards are not supposed to run at 32mhz, that's the whole issue with only some working. They're meant to work at a clock rate of 25mhz, and we're lucky that the "32mhz" the GC provides is really only around 27mhz, so it just works.
There's some that work at 50mhz too, but that's not going to help here.
There's some that work at 50mhz too, but that's not going to help here.

Re: Swiss 0.1
Interesting.emu_kidid wrote:SD cards are not supposed to run at 32mhz, that's the whole issue with only some working. They're meant to work at a clock rate of 25mhz, and we're lucky that the "32mhz" the GC provides is really only around 27mhz, so it just works.
There's some that work at 50mhz too, but that's not going to help here.
Also, black screen issues are fixed for me too in this revision.

Edit:
Something I noticed is that in Swiss, when a game needs to load a bit longer than usual, you get some low annoying 'beeps'. Where in SD boot you get sound interruptions (which are more convenient, imho).
Testing this with Mario Party, btw.
Still, this is just a (very) small thing I noticed, other than that, it's working great! Thanks again!

Edit2: Nevermind, has to do with some other things I guess, or maybe because my gamecube is now actually hooked up to my receiver, and I didn't hear it before. Don't mind this post. :p
Last edited by KirovAir on Mon Feb 07, 2011 10:14 pm, edited 6 times in total.
"The only thing more dangerous than a hardware guru with a code patch is a programmer with a soldering iron."
Re: Swiss 0.1
just ran some first tests with the IDE to EXI and a very old WD100BA (June 2000) and that might be already the reason why no game worked 

please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr
we also have a wiki filled with knowledge
http://is.gd/dX58Rm
Re: Swiss 0.1
liquitt, legacy support for those old monsters would probably work best on the original loader that was posted ages ago.

Re: Swiss 0.1
No. This happens in my GC too, it's not your receiver. I think emu_kidid will look at this in the future.Darkmystery wrote:Interesting.emu_kidid wrote:SD cards are not supposed to run at 32mhz, that's the whole issue with only some working. They're meant to work at a clock rate of 25mhz, and we're lucky that the "32mhz" the GC provides is really only around 27mhz, so it just works.
There's some that work at 50mhz too, but that's not going to help here.
Also, black screen issues are fixed for me too in this revision.
Edit:
Something I noticed is that in Swiss, when a game needs to load a bit longer than usual, you get some low annoying 'beeps'. Where in SD boot you get sound interruptions (which are more convenient, imho).
Testing this with Mario Party, btw.
Still, this is just a (very) small thing I noticed, other than that, it's working great! Thanks again!
Edit2: Nevermind, has to do with some other things I guess, or maybe because my gamecube is now actually hooked up to my receiver, and I didn't hear it before. Don't mind this post. :p
Re: Swiss 0.1
Swiss doesn't have the code yet to pause audio to avoid bleeps and stutter - I will add it in shortly 


Re: Swiss 0.1
Awwww, but those sound bleeps are so funny! ;_;emu_kidid wrote:Swiss doesn't have the code yet to pause audio to avoid bleeps and stutter - I will add it in shortly
Re: Swiss 0.1
emu_kidid wrote:2. Swiss supports the largest possible SDHC (if there was a 2 Terabyte SDHC it would support it)
4. The comments are related to running original GC DVD's with streaming on a Wii crashing.
128gb SDHC from Lexar

http://www.dpreview.com/news/1101/11010 ... gbsdxc.asp
Re: Swiss 0.1
Oh right, I haven't been home all day so I haven't had the chance to try r24 until just now.
REmake NTSC - no longer black screens for me, it boots and plays really well.
REmake NTSC - no longer black screens for me, it boots and plays really well.

.
Re: Swiss 0.1
turnerl, that's an SDXC card. I need to add support for those I think (hopefully they still have the SPI mode) 


Re: Swiss 0.1
hey thanks allot emu_kidid you saved me from a potentially expensive mistake
Re: Swiss 0.1
But you would have had OVER 9000 BLOCKSturnerl wrote:hey thanks allot emu_kidid you saved me from a potentially expensive mistake

Hey, on a serious note, why is fragmentation an issue? Is there only partial support for FAT/32?
-
- Posts: 448
- Joined: Mon Apr 05, 2010 4:11 pm
- Location: Germany
Re: Swiss 0.1
he does anyone can upload the r24 of swiss? it seems that on google the file got deleted.
by the way I have used the r2 till now and it works everything without problems from sd card but I wasnt able to install any game. everytime there came an error that the amount of free space could be detected.
I just can test sd support because my hdd adapter hasnt arrived till now.
by the way I have used the r2 till now and it works everything without problems from sd card but I wasnt able to install any game. everytime there came an error that the amount of free space could be detected.
I just can test sd support because my hdd adapter hasnt arrived till now.