megadrive v3 + Wasp fusion

[blubb]

Aight so i finally got everything in my Mail, hooked up everything, got an SD card with the 1.5 Firmware (did everything according to the Wiikey Fusion update guide), but after the reboot it won't recognise a disc, so i hooked up everything again and it's still the same status, though the blue LED is blinking very lightly + sometimes it says "trying to read disc" or something like that for a very short time.

anybody know what could be the issue?

[megalomaniac]

why are you using 1.5 firmware?

[blubb]

Well i got the wasp fusion brand new and wanted to upgrade to 1.5, i dont know the factory firmware

[blubb]

do you recommend something else? i haven't really found a useful guide yet :S

[megalomaniac]

(did everything according to the Wiikey Fusion update guide)

can you post a link to the guide you used?
seems like it needs to be updated


also look in the swiss nightly thread and find the swiss recovery iso....this is what you should be using to flash your firmware...not 1.5 firmware...

[blubb]

Alright thanks for your help,

well i used this since i thought the latest software should be the best: http://www.eurasia.nu/mirrors/wiikey_fu ... pport.html

I found the recovery *.iso and copied it into the root of a fat32 8gbyte sd card and on a FAT 1gbyte sd card -> same problem, just lightly blue flashing light and on the menu the "reading disc" is appearing for a very short time

[XC-3730C]

Where'd you get the megadrive v3?

Sent from my SAMSUNG-SM-N910A using Tapatalk

[blubb]

from badassconsoles.com, bought the wasp fusion from eurasia.

i dont need to get the firmware as an *.wbfs right?

[blubb]

....so i guess nobody has a clue and thinks one of the part is broken/not working....?

[megalomaniac]

you need to flash swiss

[blubb]

you need to flash swiss

i found the nightly recovery *.iso you mentioned and copied it onto 2 SD cards, both resolved into the same issue

[megalomaniac]

pictures of your setup

[blubb]

http://imgur.com/a/liDgb

i also just added the *.iso with the WBFS manager.
(iso is called swiss_r369_Recovery.iso)
The (micro) SD Card (8 GB) i used is in a Transflash.

I used safe ejection

[novenary]

You need to write the ISO to the SD card with win32diskimager or dd.

[megalomaniac]

check your region configuration on wasp

http://www.gc-forever.com/wiki/index.ph ... ASP_Fusion

[blubb]

You need to write the ISO to the SD card with win32diskimager or dd.

that did the trick! now i'm getting an error while i try to flash it but i will try to format it and then the flashing should work ok im appaerently dumb... i need this gecko thing right?