3D printed Full size DVD Cover for Gamecube
-
- Posts: 36
- Joined: Mon May 12, 2014 3:57 pm
- Location: Italy
3D printed Full size DVD Cover for Gamecube
Found this on thingiverse, is seems to be still in prototype stage:
https://www.thingiverse.com/thing:3109937
https://www.thingiverse.com/thing:3109937
Re: 3D printed Full size DVD Cover for Gamecube
I'd love to see someone try to print/use this
-
- Posts: 6
- Joined: Fri Jan 18, 2019 2:51 pm
Re: 3D printed Full size DVD Cover for Gamecube
I can print it but the links dead anyone download the files?
-
- Posts: 33
- Joined: Tue May 01, 2012 8:59 am
-
- Posts: 6
- Joined: Fri Jan 18, 2019 2:51 pm
Re: 3D printed Full size DVD Cover for Gamecube
Cheers Ill print one this weekend and let you know how it goes.
-
- Posts: 6
- Joined: Fri Jan 18, 2019 2:51 pm
Re: 3D printed Full size DVD Cover for Gamecube
Almost
- Attachments
-
- 7D137D61-E085-4005-90BE-FA8897DB27C8.jpeg
- (2.17 MiB) Not downloaded yet
-
- Posts: 6
- Joined: Fri Jan 18, 2019 2:51 pm
Re: 3D printed Full size DVD Cover for Gamecube
It’s works although I’ll need to reprint it the carbon fiber is to weak a material.
- Attachments
-
- 364E1856-583D-489D-A873-FE3F9D420D66.jpeg
- (2.34 MiB) Not downloaded yet
-
- Posts: 33
- Joined: Tue May 01, 2012 8:59 am
-
- Posts: 305
- Joined: Tue Sep 18, 2012 12:32 am
Re: 3D printed Full size DVD Cover for Gamecube
What settings did you use (infill, supports, material)
-
- Posts: 6
- Joined: Fri Jan 18, 2019 2:51 pm
Re: 3D printed Full size DVD Cover for Gamecube
20% infill supports enabled with cctree carbon fiber
Re: 3D printed Full size DVD Cover for Gamecube
I had this printed, fits fairly well but needs more clearance around the drive lens unit, and some supports for the screw towers.
Plan does not include the cutouts or mounting points for the rear handle, or any provisions for the lid/cover/eject mechanics or eject button.
No spot for fan filter or disk access led
Plan does not include the cutouts or mounting points for the rear handle, or any provisions for the lid/cover/eject mechanics or eject button.
No spot for fan filter or disk access led
- Attachments
-
- _20190218_004155.JPG
- (1.25 MiB) Not downloaded yet
Re: 3D printed Full size DVD Cover for Gamecube
Looking good, even if it had a simple hinge at the back for a lid that is added & removed for storage purposes that'd be great.Alterac wrote: ↑Mon Feb 18, 2019 7:43 amI had this printed, fits fairly well but needs more clearance around the drive lens unit, and some supports for the screw towers.
Plan does not include the cutouts or mounting points for the rear handle, or any provisions for the lid/cover/eject mechanics or eject button.
No spot for fan filter or disk access led
Re: 3D printed Full size DVD Cover for Gamecube
I was looking at the stock lid and it shouldn't be too hard to make that fit, but you would have to manually lift it since the eject button / lock isn't the easiest to replicate.
I'm most likely not going to accommedate the handle.
I'm most likely not going to accommedate the handle.