Swiss 0.1

BigRobotBil · Post by **BigRobotBil** » Tue Apr 05, 2011 4:53 am

I'm assuming that there wasn't support/testing done for the types of harddrives I've yapped about? (They're the non LBA48 ones I've mentioned) I'm not near my Gamecube to test it.

But, I have been playing through Windwaker without much of a problem via SD card. Keep up the great work!

YouTube · Post by **emu_kidid** » Tue Apr 05, 2011 4:59 am

I've got a non LBA 48 bit hdd I'm currently testing

panmusic · Post by **panmusic** » Tue Apr 05, 2011 5:05 am

After playing Super Mario Sunshine almost flawlessly through SD card,after 30 minutes the sound suddenly stopped.This is the first game I tested for a lengthy time.Weird...

YouTube · Post by **emu_kidid** » Tue Apr 05, 2011 5:10 am

It's a known issue that Super Mario Sunshine loses sound

panmusic · Post by **panmusic** » Tue Apr 05, 2011 9:07 am

emu_kidid wrote:It's a known issue that Super Mario Sunshine loses sound

Oh,I see...I trust you to find a solution,sooner or later.
Thanks for your reply emu_kidid!

(Out of curiosity.Have you missed my post in the beginning of the page?I can't wait to read ANY comment of yours for my suggestions or notifications.Fill me hope,please!

)

deku_scrub · Post by **deku_scrub** » Tue Apr 05, 2011 10:24 am

Is Swiss replacing SD-Boot?

Where can I buy the EXI Adaptor, need 2 ou 3 pieces, to Brazil...

Post by **liquitt** » Tue Apr 05, 2011 11:02 am

deku_scrub wrote:Is Swiss replacing SD-Boot?

Where can I buy the EXI Adaptor, need 2 ou 3 pieces, to Brazil...

it's sold out! i have a ps2 bluechip v10 with the needed xilinx chip on it to build one yourself

kevstah2004 · Post by **kevstah2004** » Tue Apr 05, 2011 12:31 pm

Sorry for my outburst, I just didn't want us IDE EXI users with only a GCN being left in the cold, you see I don't have any access to any of the following to dump games modchip, BBA, Wii, large enough sdcard, compatible pc cdvd drive etc, an sorry again if my forceful nature comes acrosss as rude.

Dr.Wily · Post by **Dr.Wily** » Tue Apr 05, 2011 12:39 pm

Dragoon wrote: What do you mean with launching a program from SD Gecko?

- Launching Swiss through PSO exploit
- Running a DOL, GCM or ELF files on the SD card.

Hells Guardian · Post by **Hells Guardian** » Tue Apr 05, 2011 6:40 pm

kevstah2004 wrote:Sorry for my outburst, I just didn't want us IDE EXI users with only a GCN being left in the cold, you see I don't have any access to any of the following to dump games modchip, BBA, Wii, large enough sdcard, compatible pc cdvd drive etc, an sorry again if my forceful nature comes acrosss as rude.

Isn't there an app that can do the dumps in multiple parts? I could have sworn there was.... Although it's been a long time since I used anything other than my USB Gecko to rip GC titles so I couldn't say.

kevstah2004 · Post by **kevstah2004** » Wed Apr 06, 2011 1:22 pm

Yes but my 1GB SDcard isn't stable anymore, if I put more than 50MB of stuff on it now it results in curruption, thankyfully I can just store swiss on it and load other dols off the HDD.

What's quicker to add support to the IDE EXI for emulators adding full IDE EXI support or making a custom GCM image that uses the start.dol as the emulator and then allow the emulator to read the files from within a GCM image be it a ROM or CD Image so it just runs the emulator as if it where a normal GC game.

Hells Guardian · Post by **Hells Guardian** » Wed Apr 06, 2011 3:20 pm

Formatting it doesn't help at all? Sounds like you need a new SD card.

kevstah2004 · Post by **kevstah2004** » Wed Apr 06, 2011 5:30 pm

Nope i've even tried overwriting the whole 1GB with a dummy file, it stalls after writing around 50-100MB, odd thing is there's no fragmented files or errors on it. I suppose it could be a problem with my sdcard reader though as the GC is still able to mount it properly, is thier anything I could do at lower level?

Slab of concrete · Post by **Slab of concrete** » Wed Apr 06, 2011 9:21 pm

i got a 2gb sandisk SD card for $6 off ebay and the guy still has over 89000 of them left or you can get a generic one from china for even cheaper if you need a new sd card

Dr.Wily · Post by **Dr.Wily** » Wed Apr 06, 2011 10:43 pm

Successfuly booted Swiss through PSO. But I have a bug when I try to load a DOL file (8Mb) from SD. I have a message : "DOL is too big" then "Invalid DOL".

I am sure this DOL file is not corrupted. Why Swiss won't load this file ? (this is a Gamecube demo from Hitmen).

This file works and run when I use PSOload.

YouTube · Post by **emu_kidid** » Wed Apr 06, 2011 10:47 pm

Dr.Wily, please file a bug report at http://code.google.com/p/swiss-gc/issues/list

and I'll look into it.

Hells Guardian · Post by **Hells Guardian** » Thu Apr 07, 2011 1:26 am

kevstah2004 wrote:Nope i've even tried overwriting the whole 1GB with a dummy file, it stalls after writing around 50-100MB, odd thing is there's no fragmented files or errors on it. I suppose it could be a problem with my sdcard reader though as the GC is still able to mount it properly, is thier anything I could do at lower level?

I'd say give it a shot in another reader if you can.

kevstah2004 · Post by **kevstah2004** » Thu Apr 07, 2011 8:37 am

Will do, I think it stopped working properly when I accidently mounted it via swiss using the IDE EXI option instead of SDGecko, might worth adding some auto detection for the SDGecko and IDE EXI to disable being able to mount one in another just to be safe, I doubt people are using a IDE EXI in both slots.

If Slot A = IDE EXI
then disable Slot A in SDGecko device selection.

If Slot B = IDE EXI
then disable Slot B in SDGecko device selection.
--
If Slot A = SDGecko
then disable Slot A in IDE EXI device selection.

If Slot B = SDGecko
then disable Slot B in IDE EXI device selection.

Dr.Wily · Post by **Dr.Wily** » Thu Apr 07, 2011 10:14 am

emu_kidid wrote:Dr.Wily, please file a bug report at http://code.google.com/p/swiss-gc/issues/list

and I'll look into it.

Humm... I must have a gmail account to make a bug report ?

Another question :

Is it technicaly possible to run an app from the GBA player cart slot ? (app on a supercard for example, not only GBx games but all kind of programs who work on GC ). Use GBA player ressources to act as storage device

alu_x · Post by **alu_x** » Thu Apr 07, 2011 8:51 pm

emu_kidid, hi! This is my first post here! Sorry for the poor english!
Congrat's for the fantastic job with Swiss!! This app is really amazing!!
I'm using it with the Wii SD Adapter on my Dol-101 Gamecube.

I dunno if you noticed it, but, almost all the games that doesn't boot with swiss, boots when you apply the fastfix with the F S T command!
It worked for me with the Wind Waker portuguese translation iso and Ikaruga.

I tested these games on my sandisk 2gb sd card, formatted on FAT32:

- RE0: Buggie sound, like the other users related;
- Zelda WW: almost flawless, with minnor loading issues;
- Ikaruga: almost perfect;
- Killer 7: runs well, but freezes sometimes.

I'll report other things later. Thank's veeeery much for the awesome job!

aleomark · Post by **aleomark** » Thu Apr 07, 2011 10:59 pm

after boot some games and emulators, when I plug my hdd back in PC almost all files doesn't show, but I guess are there cause the space are still used, but i can't see them, even if I deactive "no show hidden/protected files" in windows xp, how can I fix that?

YouTube · Post by **emu_kidid** » Thu Apr 07, 2011 11:04 pm

The write support for the IDE-EXI is not 100%. it is known to corrupt files.

Post by **liquitt** » Fri Apr 08, 2011 6:47 am

alu_x wrote:emu_kidid, hi! This is my first post here! Sorry for the poor english!
Congrat's for the fantastic job with Swiss!! This app is really amazing!!
I'm using it with the Wii SD Adapter on my Dol-101 Gamecube.

I dunno if you noticed it, but, almost all the games that doesn't boot with swiss, boots when you apply the fastfix with the F S T command!
It worked for me with the Wind Waker portuguese translation iso and Ikaruga.

I tested these games on my sandisk 2gb sd card, formatted on FAT32:

- RE0: Buggie sound, like the other users related;
- Zelda WW: almost flawless, with minnor loading issues;
- Ikaruga: almost perfect;
- Killer 7: runs well, but freezes sometimes.

I'll report other things later. Thank's veeeery much for the awesome job!

thanks for testing, please submit your results in this thread:
http://www.gc-forever.com/forums/viewto ... f=25&t=464

panmusic · Post by **panmusic** » Fri Apr 08, 2011 9:28 pm

Well,I just noticed something that I hope will be really helpfull.

I play Swiss using Wii with component cables.Actually,I have as a default resolution 480p.Every time I was trying to boot a PAL GC iso (with Wii in 480p) the result was a black screen.
Today,I did not switch off the TV immediately and after around 30 seconds the GC game autobooted displaying in 480i 60hz.After that I tried another game with a 50/60 hz selection with exactly the same results.Finally,I decided to give a try to a game that does not support 60hz (Wave Race BS) which resulted in failure.Black screen.My conclusion is that these 30 seconds of black screen actually were the first screen in 50hz where the game asks you if you want to switch to 60 hz.If you do not press anything for 30 seconds the game starts automatically in 60hz mode.So, Swiss cannot switch yet from 480p to 576i,while it does it with no problem with 480i.

Emu_kidid,I hope that you find my post usefull!

Dr.Wily · Post by **Dr.Wily** » Sat Apr 09, 2011 8:47 am

It has some problems while loading this GCM file. Run from SD on slot 2. 2Gb SD fat32 formated.

I don't know why, file is only 40mb size... The code dump after loading..

Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1

Re: Swiss 0.1