Page 1 of 1
killed my cube no 12 volt from power regulator on pin 21
Posted: Thu Apr 24, 2014 6:25 pm
by marcus9199
I am needing Help. mistakenly hooked up a small 5 volt Audio amp to my 12 volt line. My gamecube now does nothing. on checking the power regulator the only problem I see on it is that is has no 12 volts on pin 21. does anyone have any suggestions?
Re: killed my cube no 12 volt from power regulator on pin 21
Posted: Thu Apr 24, 2014 11:35 pm
by novenary
You can run the 12V line off 5V just fine. So desolder 12V and hook up/bridge 5V on it.
Re: killed my cube no 12 volt from power regulator on pin 21
Posted: Fri Apr 25, 2014 2:45 am
by marcus9199
Thanks for the reply. I tried it with no luck. Guess is time for more trouble shooting.
Re: killed my cube no 12 volt from power regulator on pin 21
Posted: Fri Apr 25, 2014 4:16 am
by megalomaniac
are you using the GC power board?
if so, did you blow the main 12v fuse??
Re: killed my cube no 12 volt from power regulator on pin 21
Posted: Fri Apr 25, 2014 4:32 am
by marcus9199
Yes the original. I just found that fuse thank you.