Hey,
I read a lot but didn't find a solution. I just bought the SD MEDIA LAUNCHER from CODEJUNKIES and get the AR Version. I use a 2GB SD CARD (no SDHC) formated in FAT32 (also tried FAT16) and put the CGoS 1.5 with Swiss Folder on it (seen here http://youtu.be/gb04lK1WATc )
but when I start the cube only the AR starts, I can't chose anything of the SD CARD.
SD MEDIA LAUNCHER won't start
Re: SD MEDIA LAUNCHER won't start
I haven't got an SD Media Launcher but I overheard the guy in the video say make sure the card is in FAT format, which means not FAT32 or not FAT16
It's also been a while but in windows you can format as FAT in dos prompt when you use /fs:fat switch or download something with a GUI, like the hp usb disk storage format
It's also been a while but in windows you can format as FAT in dos prompt when you use /fs:fat switch or download something with a GUI, like the hp usb disk storage format
Re: SD MEDIA LAUNCHER won't start
The disc isn't able to read your SD card due to the crappy SD adapter that is bundled with SDML, have a look on the forums here for why that might be (people recommend using a piece of tape to fix issues).

- yesimnathan
- Posts: 2
- Joined: Sat Aug 06, 2016 9:25 pm
Re: SD MEDIA LAUNCHER won't start
I'm having this exact issue. I've tried 3 different SD (not SDHC) cards formatting them FAT16 and FAT32, tried the tape fix, verified continuity on the SD adapter. I'm not really sure what else to try. My Action Replay was bought from Amazon last week. The paperwork says it's V1.2. It doesn't have the ability to add new codes so I couldn't try the SDLoader route. Any help/advice would be very appreciated! 

- yesimnathan
- Posts: 2
- Joined: Sat Aug 06, 2016 9:25 pm
Re: SD MEDIA LAUNCHER won't start
I figured out my issue. I am using a TOPRAM 4GB SD card & for some reason, the Action Replay doesn't like for it to have a single partition that takes up the entire card. I created a single 1GB partition, put a FAT32 filesystem on it, and put swiss.dol in there. Worked like a charm! I'll experiment some more with larger partitions (2-3GB) later. For now, this resolved my issue.
Re: SD MEDIA LAUNCHER won't start
Hello, i formatted with default FAT32 but it didn't work. Later I changed for this configuration W95 FAT32 (0x0b). As seen in the screenshot.
- Attachments
-
- Screenshot from 2020-06-29 15-19-47.png
- (70.17 KiB) Not downloaded yet