Game Boy Interface/High-Fidelity Edition: Difference between revisions

From GC-Forever Wiki
Jump to navigation Jump to search
← Older editNewer edit →
Line 285: Line 285:


; <code>--poll=<0-11></code>
; <code>--poll=<0-11></code>
: Set polling rate.
: Set controller polling rate.
: {| class="wikitable"
: {| class="wikitable"
| '''0:'''
| '''0:'''
Line 414: Line 414:
: Set scan mode. The default is the Progressive Scan Mode system setting (non-interlace or progressive).
: Set scan mode. The default is the Progressive Scan Mode system setting (non-interlace or progressive).
:; <code>clock2x</code>, <code>no-clock2x</code>
:; <code>clock2x</code>, <code>no-clock2x</code>
:: Enable 27 MHz pixel clock (default: auto).
:: Enable 27MHz pixel clock (default: auto). Enabling doubles the refresh rate for <code>interlace</code> modes.
:; <code>size2x</code>, <code>no-size2x</code>
:; <code>size2x</code>, <code>no-size2x</code>
:: Enable 2x video oversampling (default: auto).
:: Enable 2x video oversampling (default: auto). Enabling halves the refresh rate.
; <code>--usb</code>, <code>--no-usb</code>
; <code>--usb</code>, <code>--no-usb</code>
: Enable [[USBGecko|USB Gecko]] features (default: yes).
: Enable [[USBGecko|USB Gecko]] features (default: yes).

Revision as of 22:39, 7 June 2018

Game Boy Interface
Information
Author(s) Extrems
Type Utility
Version Rolling release
Licence All rights reserved
Links
Download main package
Download extra package
Website
Discussion
Source
This software must not be sold, neither alone nor as part of a bundle.
If you paid for this software or received it as part of a bundle following payment, you have been scammed and should demand your money back immediately.
Firmware update notice for GCVideo products.
It is strongly recommended to update to GCVideo-DVI v3.0 or later before using this software. GCVideo Lite products are not recommended under any circumstances.

A spiritual successor of the ultra-low latency version, Game Boy Interface High-Fidelity Edition aims to provide the best source quality for further processing or archival.

Controls

Type A (two-handed)

Nintendo GameCube Nintendo GameCube Controller Logitech Speed Force Action
A/B Buttons A/B Buttons or Accelerator/Brake Pedals A/B Buttons
Y/Z Buttons Y/Z Buttons Select
X Button or Start/Pause X Button or Start/Pause Start
+Control Pad or Control Stick +Control Pad or Steering Wheel +Control Pad
L/R Buttons L/R Buttons L/R Buttons
Reset Button B, X and Start/Pause Buttons B, X and Start/Pause Buttons Power Switch
Reset Button X, Y and Start/Pause Buttons
(Hold for 1.5 seconds) 		Recalibrate
X, Y and Start/Pause Buttons
(Hold for 3 seconds) 		Swap controls
(Only with SNES Controller)
DK Bongos Controller Active Life Mat Controller Action
Bottom Right/Left Orange Up/Right A/B Buttons
Hand Clap - Button Select
Start/Pause + Button Start
Top Right Blue or Orange Square +Control Pad Right
Top Left Blue Left +Control Pad Left
Blue Up +Control Pad Up
Blue or Orange Down +Control Pad Down

Type B (one-handed)

Nintendo GameCube Nintendo GameCube Controller Logitech Speed Force Action
A/B Buttons A/B Buttons or Accelerator/Brake Pedals A/B Buttons
L/Z Buttons Y/Z Buttons Select
R Button or Start/Pause X Button or Start/Pause Start
+Control Pad, Control Stick or C Stick +Control Pad or Steering Wheel +Control Pad
Y/X Buttons L/R Buttons L/R Buttons
Reset Button B, X and Start/Pause Buttons B, X and Start/Pause Buttons Power Switch
Reset Button X, Y and Start/Pause Buttons
(Hold for 1.5 seconds) 		Recalibrate
X, Y and Start/Pause Buttons
(Hold for 3 seconds) 		Swap controls
(Only with SNES Controller)
DK Bongos Controller Active Life Mat Controller Action
Bottom Right/Left Orange Up/Right A/B Buttons
Hand Clap - Button Select
Start/Pause + Button Start
Blue or Orange Square +Control Pad Right
Blue Left +Control Pad Left
Blue Up +Control Pad Up
Blue or Orange Down +Control Pad Down
Top Left/Right L/R Buttons

Type C (Super Mario World: Super Mario Advance 2)

Nintendo GameCube Nintendo GameCube Controller Logitech Speed Force Action
B/Y or X Buttons A/B Buttons or Accelerator/Brake Pedals A/B Buttons
Z Button Y/Z Buttons Select
Start/Pause X Button or Start/Pause Start
+Control Pad or Control Stick +Control Pad or Steering Wheel +Control Pad
L/R or A Buttons L/R Buttons L/R Buttons
Reset Button B, X and Start/Pause Buttons B, X and Start/Pause Buttons Power Switch
Reset Button X, Y and Start/Pause Buttons
(Hold for 1.5 seconds) 		Recalibrate
X, Y and Start/Pause Buttons
(Hold for 3 seconds) 		Swap controls
(Only with SNES Controller)

Type D (The Legend of Zelda: A Link to the Past)

Nintendo GameCube Nintendo GameCube Controller Logitech Speed Force Action
Y/B Buttons A/B Buttons or Accelerator/Brake Pedals A/B Buttons
R Button or Start/Pause Y/Z Buttons Select
L/Z Buttons X Button or Start/Pause Start
+Control Pad, Control Stick or C Stick +Control Pad or Steering Wheel +Control Pad
X/A Buttons L/R Buttons L/R Buttons
Reset Button B, X and Start/Pause Buttons B, X and Start/Pause Buttons Power Switch
Reset Button X, Y and Start/Pause Buttons
(Hold for 1.5 seconds) 		Recalibrate
X, Y and Start/Pause Buttons
(Hold for 3 seconds) 		Swap controls
(Only with SNES Controller)

Options

--poll=<0-11>
Set controller polling rate.
0: VSync (most compatible)
1: 1000Hz (default)
2: 500Hz
3: 350Hz
4: 300Hz
5: 250Hz
6: 200Hz
7: 150Hz
8: 150Hz
9: 125Hz
10: 125Hz
11: 100Hz
--control=<P1[:P2[:P3[:P4]]]>
Set control scheme. The default is the Game Boy Player Start-up Disc's Controller setting (0 or 1).
0: Type A (two-handed)
1: Type B (one-handed)
2: Type C (Super Mario World: Super Mario Advance 2)
3: Type D (The Legend of Zelda: A Link to the Past)
--delay-reset=<N>
Set reset delay (default: 0).
--delay-video=<N>
Set video buffering (default: 1).
--movie=<path>, --no-movie
Play input log (default: no).
--movie-record, --no-movie-record
Record input log (default: no).
--palette=<xxxx-xxxx-xxxx>, --no-palette
Apply Super Game Boy color palette (default: no).
--lut3d=<path>, --no-lut3d
Load 32x32x32 lookup table (default: no).
--lut3d-order=<rgb|gbr|bgr>
Specify lookup table order (default: rgb).
--matrix=<identity|gba|gbc|gbi|nds|palm|psp|vba>
Set color matrix (default: identity).
identity: Identity matrix
gba: Game Boy Advance (by Pokefan531)
gbc: Gambatte/higan (requires --input-gamma=1.0 and --output-gamma=1.0)
gbi: Game Boy Interface
nds: Nintendo DS (by Pokefan531)
palm: Palm Treo 700p (by Pokefan531)
psp: PlayStation Portable (by Pokefan531)
vba: VisualBoyAdvance-M (by Pokefan531)
--input-gamma=<red[:green[:blue]]>
Set gamma (default: 2.2).
--output-gamma=<value>
Specify screen gamma (default: 2.2).
--contrast=<red[:green[:blue]]>
Set gain (default: 1.0).
--brightness=<red[:green[:blue]]>
Set bias (default: 0.0).
--volume=<left[:right]>
Set audio gain (default: 0.75).
--sound=<mono|stereo>
Set sound mode. The default is the Sound Mode system setting (mono or stereo).
--colorspace=<ycc601|ycc709|ycc2020|rgb709|rgb2020>
Set video color space (default: ycc601).
ycc601: IEC 61966-2-4 xvYCC601
ycc709: IEC 61966-2-4 xvYCC709
ycc2020: ITU-R BT.2020 Y’C’BC’R
rgb709: IEC 61966-2-1 sRGB
rgb2020: ITU-R BT.2020 R’G’B’
--format=<ntsc|pal|pal-m|ntsc-50|pal-60|custom|custom-m|hd60|hd50|hd48>
Set video format (default: custom).
--scan-mode=<[interlace|quasi-interlace|non-interlace|non-progressive|progressive][,clock2x][,size2x]>
Set scan mode. The default is the Progressive Scan Mode system setting (non-interlace or progressive).
clock2x, no-clock2x
Enable 27MHz pixel clock (default: auto). Enabling doubles the refresh rate for interlace modes.
size2x, no-size2x
Enable 2x video oversampling (default: auto). Enabling halves the refresh rate.
--usb, --no-usb
Enable USB Gecko features (default: yes).
--enhance, --no-enhance
Enable Game Boy Player enhancements (default: yes).
<path>
Load Game Boy Advance multiboot ROM (default: default.mb.gz).

Examples

Color restoration

Mario & Luigi: Superstar Saga

This game reduces contrast when played with Game Boy Player enhancements. 

--input-gamma=1.
--output-gamma=1.
--contrast=1.1

Super Mario Bros. 3: Super Mario Advance 4

This game reduces gamma when played without Game Boy Player enhancements. 

--input-gamma=2.8

The Legend of Zelda: Oracle of Ages/Seasons

This game reduces gamma when played on a Game Boy Advance. Due to Game Boy Color limitations, only shadows can be restored perfectly. 

--input-gamma=4.

This can be combined with Gambatte/higan's color correction as a special case. 

--matrix=gbc
--input-gamma=1.8
--output-gamma=1.

Video optimization

Open Source Scan Converter

--format=hd60
--scan-mode=non-interlace

XRGB-mini Framemeister

Included as gbihf-xrgb.cli, gbihf-xrgb.dol+cli and gbihf-xrgb.gci. Refer to FirebrandX for configuration. 

--format=custom-m
--scan-mode=non-interlace

FAQs

How do I change Game Paks?

  1. Hold the Reset Button.
  2. Slide the Game Pak Ejector.
  3. Insert a Game Pak into the Game Pak Slot.
  4. Release the Reset Button.

Can I play Game Boy Advance Video?

Yes. You can do so by disabling Game Boy Player enhancements (--no-enhance), or holding a direction while the Game Boy Player logo is visible.

Is this an emulator? Can I play ROMs?

No, but there's Enhanced mGBA if you're looking for one.

Changelog

June, 2018

  • Added video options.
  • Added component video DAC oversampling.
  • Removed left/right chroma location support.

May, 2018

  • Added Super Game Boy color palette setting.
  • Changed default chroma location to center.
  • Fixed Game Boy Player advertisement.
  • Fixed rumble protocol handshake.

April, 2018

  • Added movie recording/playback.
  • Updated GBA-as-GC controller.

March, 2018

  • Added RGB Sync-on-Green support.
  • Added xvYCC/BT.2020 support for auto-generated 3D LUT.
  • Added control swapping for SNES Controllers.
  • Added center/right chroma location support.
  • Improved multiboot implementation.
  • Fixed SD card compatibility.
  • Fixed multiboot to rumble protocol transition.

Media

Retrieved from "http://www.gc-forever.com/wiki/index.php?title=Game_Boy_Interface/High-Fidelity_Edition&oldid=3857"