Enhanced mGBA

From GC-Forever Wiki
Revision as of 21:25, 4 June 2021 by Extrems (talk | contribs) (Options)
Jump to navigation Jump to search
Enhanced mGBA
Author(s) Extrems
Type Handheld emulator
Version Rolling release
Licence MPL v2.0
Download main package
Download extra package

Enhanced mGBA (emGBA) is an enhanced port of the Game Boy Advance emulator, based on Game Boy Interface Standard Edition.


Specify screen aspect ratio. The default is the Progressive Scan Mode system setting (4:3 or 16:9).
Set offset. The default is the Screen Position system setting (-32 to +32).
Set zoom. The default is the Game Boy Player Start-up Disc's Screen Size setting (2.0 or 2.375).
Set rotation (default: 0).
Set controller polling rate. Use if your third-party controller or controller adapter is malfunctioning.
Not applicable to Nintendo 64 Controllers using a passive connector adapter.
0: VSync (most compatible)
1: 1000Hz (default)
2: 500Hz
3: 350Hz
4: 300Hz
5: 250Hz
6: 200Hz
7: 150Hz
8: 150Hz
9: 125Hz
10: 125Hz
11: 100Hz
--cursor=<path>, --no-cursor
Load texture palette for cursors (default: point.tpl.gz).
--overlay=<path>, --no-overlay
Load texture palette for graphic overlays (default: frame.tpl.gz).
Set texture palette index for graphic overlay. The default is the Game Boy Player Start-up Disc's Frame setting (0 to 19).
Set texture scale for graphic overlay (default: auto).
Set image doubling or screen filter. The default is the Game Boy Player Start-up Disc's Screen Filter setting (none, blend, deflicker).
Also known as the Sharp screen filter.
Blend frames n and n-1 (default: 0.55).
Also known as the Soft screen filter.
Blend frames n and n-1 where n and n-2 are equal (default: 0.55).
Also known as the Normal screen filter.
Blend frames with accumulation buffer (default: 0.55).
As used by the Nintendo 3DS Ambassador games.
Apply enhanced EPX/Scale2×/AdvMAME2× algorithm with Y’C’BC’R difference.
Apply EPX/Scale2×/AdvMAME2× algorithm.
Apply Eagle algorithm.
Apply simple scanlines.
prescale, no-prescale
Enable prescaling filter (default: no).
Set dithering algorithm (default: threshold). Setting this option to none is not recommended when using linear RGB rendering.
Applied during prescaling.
Set image scaling filter. Setting this option to nearest is not recommended when using fractional scaling or a non-square pixel aspect ratio.
nearest: Nearest-neighbor interpolation (fastest)
bilinear: Bilinear interpolation
area: Sharp bilinear interpolation (default)
box: Inverse sharp bilinear interpolation
Set color matrix (default: gbi).
This translates the RGB color primaries to the standard RGB color space.
identity: Identity matrix
gba: Game Boy Advance (by Pokefan531)
gbi: Game Boy Interface
nds: Nintendo DS (by Pokefan531)
palm: Palm Treo 700p (by Pokefan531)
psp: PlayStation Portable (by Pokefan531)
vba: VisualBoyAdvance-M (by Pokefan531)
Set gamma (default: 2.2).
Specify screen gamma (default: 2.2).
Set gain (default: 1.0).
Set lift (default: 0.0).
Set video format. The default is the Video Mode system setting (ntsc, pal-60, pal-m).
ntsc: NTSC-J
pal: PAL-B/G/D/K/I
pal-m: PAL-M
ntsc-50: NTSC-50
pal-60: PAL-60
Note: GCVideo-DVI is only designed to support NTSC-J, PAL-B/G/D/K/I and PAL-60.
AVE N-DOL can only output CVBS or Y/C as NTSC-J, PAL-M or NTSC-50.
AVE P-DOL can only output CVBS as PAL-B/G/D/K/I or PAL-60.
Set scan mode. The default is the Progressive Scan Mode system setting (interlace or progressive).
interlace: 15 or 18-22kHz interlaced (480i@60Hz; 576i@50Hz; 720i@48-60Hz), deflickering
quasi-interlace: 15 or 18-22kHz segmented frame (480sf@30Hz; 576sf@25Hz; 720sf@24-30Hz)
non-interlace: 15 or 18-22kHz progressive (240p@60Hz; 288p@50Hz; 360p@48-60Hz)
non-progressive: 31 or 27-33kHz interlaced (960i@60Hz; 1152i@50Hz; 1080i@48-60Hz), field rendering
progressive: 31 or 27-33kHz progressive (480p@60Hz; 576p@50Hz; 540p@48-60Hz)
clock2x, no-clock2x
Enable 27MHz pixel clock (default: auto). Enabling doubles the refresh rate for interlace scan modes. Disabling halves the refresh rate for progressive scan modes.
This depend on a compatible video encoder or transmitter not mangling its input.
size2x, no-size2x
Enable 2× video oversampling (default: auto). Enabling halves the refresh rate.
If the video format's horizontal resolution is less or equal to 682, the internal resolution is doubled instead.
This depend on a compatible video encoder or transmitter not mangling its input.
Set static IPv4 address.
Set static IPv4 gateway.
Set static IPv4 netmask.
--network, --no-network
Enable Broadband Adapter features (default: yes).
Load ROM.