Essentially what I wish to do is to put a Gamecube, with the BBA, GB Player, a Qoob Pro Mod-chip, and if possible (replace the traditional GC top disc drive, with a Wii styled front loading drive); and shove the entire mess into a custom build pc case's (already sorta conceptually designed) 5.25" bays (if this is probable it would most likely be 2 or 3 5.25" bays.
The case is designed with traditional PC expansion slots in the rear in mind, so what I am intending to do is:
-Place a Wii front loading disc drive, 2x memory card slots, and game boy player adapter, and place them in their own enclosed 2-3 5.25" bays (possibly shove (if WII styled disc drive) and memory cards in one 5.25" , main board in another, and GC Player/bottom connectors in the lower 5.25" bay.
-rewire power and video out to a PC back-plate expansion style port to plug directly into wall/monitor
-rewire GC expansion port with BBA plugged in to port to the same slot back-plate as video/power
-Have the Qoob pro setup as standard, BUT have the chip's USB connector to be directly plugged into a mini USB-USB bridge, which would lead a single wire to a motherboard internal USB port.
Anyways, the entire project seems like a rewiring train wreck, but would save some space than having my GC be on my table near my monitor (I know they're pretty small, but I have bad OCD

download/file.php?mode=view&id=2248
,Please add any inputs or criticism, thank you
